[Sun Jun 23 10:35:53 2013] Detection parameters:
  Position = (416.9, 286.2) = 20 9 19.14 -56 24 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 436.6 +/- 26.9
  Background counts = 55.9
  Rate = 0.02 +/- 0.001

[Sun Jun 23 10:35:55 2013] Off-axis axis estimate = 8.63'
[Sun Jun 23 10:36:20 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:36:20 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Sun Jun 23 10:36:20 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Sun Jun 23 10:36:20 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.75"
[Sun Jun 23 10:36:21 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 23 10:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 10:36:21 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 23 10:36:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 10:36:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:22 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 23 10:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 10:36:22 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 23 10:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 10:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:37 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.628126 pixels away
[Sun Jun 23 10:36:37 2013] Source 5 is offset by 7.804946 and 1.951071 pixels which is larger than
2 X fitted extent = 6.183908 x 6.183908, not incorporating fit results
[Sun Jun 23 10:36:37 2013] Spatial fit model total counts = 727.629000, observed total counts = 709.000000
[Sun Jun 23 10:36:37 2013] Offset between fit and detection position for source 5 = 1.266323 pixels
[Sun Jun 23 10:36:37 2013] Warning, changing simple spatial fit ID from 5 to 34
[Sun Jun 23 10:36:37 2013] 728.721500 total counts/ 688.500000 bgd. counts: snr = 1.532873
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.266323 pixels
  Position = (415.8, 285.6) = 20 9 19.73 -56 24 18.0
  Extent = 6.3 (4.1-9.3)", rotation angle = 0
  Source counts = 40.2 +/- 27.0
  Background counts = 688.5
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability