[Sun Jun 23 10:35:54 2013] Detection parameters:
  Position = (343.9, 321.7) = 20 9 57.42 -56 21 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.4 +/- 20.2
  Background counts = 53.5
  Rate = 0.007 +/- 0.0006

[Sun Jun 23 10:35:55 2013] Off-axis axis estimate = 3.70'
[Sun Jun 23 10:36:20 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:36:20 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Sun Jun 23 10:36:20 2013] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.779
[Sun Jun 23 10:36:20 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 8.28"
[Sun Jun 23 10:36:21 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Jun 23 10:36:21 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Jun 23 10:36:21 2013] Fit fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_src25 appears to have run properly
[Sun Jun 23 10:36:22 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Jun 23 10:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 23 10:36:22 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Jun 23 10:36:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Jun 23 10:36:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:37 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.755519 pixels away
[Sun Jun 23 10:36:37 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:36:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:36:37 2013] Assessing source extent using major
[Sun Jun 23 10:36:37 2013] Source does appear to be extended
[Sun Jun 23 10:36:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:37:00 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:37:00 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Sun Jun 23 10:37:00 2013] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.779
[Sun Jun 23 10:37:00 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 8.28"
[Sun Jun 23 10:37:01 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun 23 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_src24.csv
[Sun Jun 23 10:37:01 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun 23 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_src24.csv
[Sun Jun 23 10:37:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:01 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun 23 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Jun 23 10:37:01 2013] fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun 23 10:37:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Jun 23 10:37:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:13 2013] Spatial fit model total counts = 730.759000, observed total counts = 648.000000
[Sun Jun 23 10:37:13 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 10:37:13 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:37:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:37:13 2013] Assessing source extent using major
[Sun Jun 23 10:37:13 2013] Source does appear to be extended
[Sun Jun 23 10:37:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:37:35 2013] XMMSAS src. selection expression = ellipse(29872.721710, 27941.798553, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 10:37:35 2013] Not overwriting source region fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 23 10:37:35 2013] Extracting stamp from image fullrun_pn_xmm0553180101_pi300-10000_cl_sm2.00.img.gz, (306, 284) - (381, 359)
[Sun Jun 23 10:37:35 2013] XMMSAS bgd. selection expression = annulus(29872.721710, 27941.798553, 1087.500000, 2175.000000, X, Y) && !ellipse(29091.695740, 26259.033600, 385.464011, 385.464011, 0.000000, X, Y)
[Sun Jun 23 10:37:35 2013] Writing fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26.gif
[Sun Jun 23 10:37:37 2013] ../../xmm0553180101/products/events/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0553180101/products/events/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Sun Jun 23 10:37:37 2013] Mean detx,y = (2192.87, -1579.90) 
[Sun Jun 23 10:37:37 2013] ../../xmm0553180101/products/images/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0553180101/products/images/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Sun Jun 23 10:37:37 2013] ../../xmm0553180101/products/spectra/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0553180101/products/spectra/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Sun Jun 23 10:37:37 2013] Setting source spectrum file to fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 23 10:37:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 23 10:37:37 2013] ../../xmm0553180101/products/lightcurves/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0553180101/products/lightcurves/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Sun Jun 23 10:37:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 10:37:44 2013] rmf not generated due to insufficient counts
[Sun Jun 23 10:37:44 2013] fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Sun Jun 23 11:05:31 2013] Updating aperture counts using extracted products
[Sun Jun 23 11:05:31 2013] Total counts from fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 504.00
[Sun Jun 23 11:05:31 2013] Total counts from fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2456.00
[Sun Jun 23 11:05:31 2013] Got source and background scale factors 1095194.000000, 8748134.000000
[Sun Jun 23 11:05:31 2013] User source parameters:
  Position = (343.9, 321.7) = 20 9 57.42 -56 21 42.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 196.5 +/- 23.5
  Background aperture counts = 307.5
  Rate = 0.004 +/- 0.0005

[Sun Jun 23 11:05:31 2013] Updating counts from extracted products
[Sun Jun 23 11:05:31 2013] Set source signif. to 196.53/17.53 = 11.21
[Sun Jun 23 11:05:35 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 11:05:35 2013] Using photon index=1.80, rate=0.00427, arf fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26.arf
[Sun Jun 23 11:05:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 11:05:35 2013] Updating source flux to 1.3e-14
[Sun Jun 23 11:05:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 11:05:57 2013] xmm0553180101/analysis//spectral/fullrun_pn_xmm0553180101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete