[Sun Jun 23 10:35:57 2013] Detection parameters:
  Position = (411.2, 320.6) = 20 9 22.20 -56 21 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.7 +/- 11.7
  Background counts = 20.0
  Rate = 0.002 +/- 0.0004

[Sun Jun 23 10:35:58 2013] Off-axis axis estimate = 8.33'
[Sun Jun 23 10:36:24 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:36:24 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Sun Jun 23 10:36:24 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.870
[Sun Jun 23 10:36:24 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.59"
[Sun Jun 23 10:36:25 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 23 10:36:25 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 23 10:36:25 2013] Fit fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_src12 appears to have run properly
[Sun Jun 23 10:36:25 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 23 10:36:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 23 10:36:25 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 23 10:36:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 23 10:36:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:48 2013] Spatial fit model total counts = 261.888000, observed total counts = 247.000000
[Sun Jun 23 10:36:48 2013] Offset between fit and detection position for source 22 = 0.376492 pixels
[Sun Jun 23 10:36:48 2013] 262.328600 total counts/ 203.031000 bgd. counts: snr = 4.161558
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.376492 pixels
  Position = (411.3, 320.3) = 20 9 22.12 -56 21 47.3
  Extent = 8.2 (6.0-11.2)" x 3.7 (2.8-4.7)", rotation angle = 39 (25-56) degrees
  Source counts = 59.3 +/- 16.2
  Background counts = 203.0
  Rate = 0.001 +/- 0.0003
[Sun Jun 23 10:36:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:36:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:36:48 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 10:36:48 2013] Source does appear to be extended
[Sun Jun 23 10:36:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Sun Jun 23 10:37:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:37:03 2013] Initial guess for spatial extent in simple fitting = 5.93"
[Sun Jun 23 10:37:03 2013] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.865
[Sun Jun 23 10:37:03 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 5.93"
[Sun Jun 23 10:37:03 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 23 10:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_src12.csv
[Sun Jun 23 10:37:03 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 23 10:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_src12.csv
[Sun Jun 23 10:37:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:04 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 23 10:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Jun 23 10:37:04 2013] fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 23 10:37:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sun Jun 23 10:37:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:23 2013] Warning, spatial fit 12 centroid is now closest to src. 3
[Sun Jun 23 10:37:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:37:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:37:23 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 10:37:23 2013] Source does appear to be extended
[Sun Jun 23 10:37:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Sun Jun 23 10:37:50 2013] XMMSAS src. selection expression = ellipse(35738.046600, 27814.537600, 491.656214, 219.596406, 38.503648, X, Y)
[Sun Jun 23 10:37:50 2013] Not overwriting source region fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22_src.reg
[Sun Jun 23 10:37:50 2013] Extracting stamp from image fullrun_mos2_xmm0553180101_pi300-10000_cl_sm2.00.img.gz, (383, 292) - (440, 349)
[Sun Jun 23 10:37:50 2013] XMMSAS bgd. selection expression = annulus(35738.046600, 27814.537600, 819.427024, 1638.854047, X, Y)
[Sun Jun 23 10:37:50 2013] Writing fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22.gif
[Sun Jun 23 10:40:23 2013] Mean detx,y = (-7719.55, 2921.43) 
[Sun Jun 23 10:40:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 10:40:39 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 10:40:39 2013] Setting source spectrum file to fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Jun 23 10:40:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Jun 23 11:02:20 2013] Not generating rmf since there are only 59 counts
[Sun Jun 23 11:02:20 2013] rmf not generated due to insufficient counts
[Sun Jun 23 11:05:41 2013] Updating aperture counts using extracted products
[Sun Jun 23 11:05:41 2013] Total counts from fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 76.00
[Sun Jun 23 11:05:41 2013] Total counts from fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 634.00
[Sun Jun 23 11:05:41 2013] Got source and background scale factors 295492.000000, 5874108.000000
[Sun Jun 23 11:05:41 2013] User source parameters:
  Position = (411.3, 320.3) = 20 9 22.12 -56 21 47.3
  Extent = 8.2 (6.0-11.2)" x 3.7 (2.8-4.7)", rotation angle = 39 (25-56) degrees
  Source aperture counts = 44.1 +/- 9.8
  Background aperture counts = 31.9
  Rate = 0.0009 +/- 0.0002

[Sun Jun 23 11:05:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 11:05:44 2013] Using photon index=1.80, rate=0.00119, arf fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22.arf
[Sun Jun 23 11:05:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 11:05:44 2013] Updating source flux to 2.5e-14
[Sun Jun 23 11:05:50 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 11:05:53 2013] xmm0553180101/analysis//spectral/fullrun_mos2_xmm0553180101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete