[Sun Jun 23 10:35:55 2013] Detection parameters:
  Position = (433.0, 432.1) = 20 9 11.04 -56 13 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.8 +/- 10.1
  Background counts = 24.2
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 10:35:56 2013] Off-axis axis estimate = 13.75'
[Sun Jun 23 10:36:22 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:36:22 2013] Initial guess for spatial extent in simple fitting = 13.30"
[Sun Jun 23 10:36:22 2013] source mask rpix=3.1, npix_max = 50, mask sum = 37, frac = 0.731
[Sun Jun 23 10:36:22 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.30"
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 23 10:36:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src24.csv
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 23 10:36:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src24.csv
[Sun Jun 23 10:36:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 23 10:36:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 23 10:36:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun Jun 23 10:36:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:42 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.919413 pixels away
[Sun Jun 23 10:36:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:36:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:36:42 2013] Assessing source extent using major
[Sun Jun 23 10:36:42 2013] Source does appear to be extended
[Sun Jun 23 10:36:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:37:02 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:37:02 2013] Initial guess for spatial extent in simple fitting = 13.30"
[Sun Jun 23 10:37:02 2013] source mask rpix=3.1, npix_max = 50, mask sum = 37, frac = 0.731
[Sun Jun 23 10:37:02 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.30"
[Sun Jun 23 10:37:02 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun 23 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src24.csv
[Sun Jun 23 10:37:02 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun 23 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src24.csv
[Sun Jun 23 10:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:03 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun 23 10:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Jun 23 10:37:03 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun 23 10:37:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun Jun 23 10:37:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:18 2013] Spatial fit model total counts = 473.835000, observed total counts = 311.000000
[Sun Jun 23 10:37:18 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 10:37:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:37:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:37:18 2013] Assessing source extent using major
[Sun Jun 23 10:37:18 2013] Source does appear to be extended
[Sun Jun 23 10:37:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:37:45 2013] XMMSAS src. selection expression = ellipse(37620.503418, 37544.314697, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 10:37:45 2013] Not overwriting source region fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun 23 10:37:45 2013] Extracting stamp from image fullrun_mos1_xmm0553180101_pi300-10000_cl_sm2.00.img.gz, (395, 395) - (470, 470)
[Sun Jun 23 10:37:45 2013] XMMSAS bgd. selection expression = annulus(37620.503418, 37544.314697, 1087.500000, 2175.000000, X, Y) && !ellipse(35420.814760, 36765.802000, 459.312813, 459.312813, 0.000000, X, Y)
[Sun Jun 23 10:37:45 2013] Writing fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8.gif
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/events/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0553180101/products/events/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Jun 23 10:37:46 2013] Mean detx,y = (12776.27, 6836.11) 
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/images/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0553180101/products/images/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/spectra/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0553180101/products/spectra/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Jun 23 10:37:46 2013] Setting source spectrum file to fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun 23 10:37:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/lightcurves/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0553180101/products/lightcurves/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Jun 23 10:37:50 2013] Not generating rmf since there are only 55 counts
[Sun Jun 23 10:37:50 2013] rmf not generated due to insufficient counts
[Sun Jun 23 10:37:50 2013] fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Sun Jun 23 11:05:38 2013] Updating aperture counts using extracted products
[Sun Jun 23 11:05:38 2013] Total counts from fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 175.00
[Sun Jun 23 11:05:39 2013] Total counts from fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1069.00
[Sun Jun 23 11:05:39 2013] Got source and background scale factors 729810.000000, 7326267.000000
[Sun Jun 23 11:05:39 2013] User source parameters:
  Position = (433.0, 432.1) = 20 9 11.04 -56 13 35.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.5 +/- 14.3
  Background aperture counts = 106.5
  Rate = 0.001 +/- 0.0003

[Sun Jun 23 11:05:39 2013] Updating counts from extracted products
[Sun Jun 23 11:05:39 2013] Set source signif. to 68.51/10.32 = 6.64
[Sun Jun 23 11:05:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 11:05:40 2013] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8.arf
[Sun Jun 23 11:05:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 11:05:40 2013] Updating source flux to 4e-14
[Sun Jun 23 11:05:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 11:05:50 2013] xmm0553180101/analysis//spectral/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete