[Sun Jun 23 10:35:55 2013] Detection parameters:
  Position = (332.1, 452.1) = 20 10 3.69 -56 12 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.4 +/- 11.2
  Background counts = 20.3
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 10:35:56 2013] Off-axis axis estimate = 11.40'
[Sun Jun 23 10:36:22 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:36:22 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Sun Jun 23 10:36:22 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.832
[Sun Jun 23 10:36:22 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 12.13"
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun 23 10:36:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src23.csv
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun 23 10:36:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src23.csv
[Sun Jun 23 10:36:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun 23 10:36:24 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun 23 10:36:24 2013] Fit fullrun_mos1_xmm0553180101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jun 23 10:36:42 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.452787 pixels away
[Sun Jun 23 10:36:42 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:36:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:36:42 2013] Assessing source extent using major
[Sun Jun 23 10:36:42 2013] Source does appear to be extended
[Sun Jun 23 10:36:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:37:02 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:37:02 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Sun Jun 23 10:37:02 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.832
[Sun Jun 23 10:37:02 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 12.13"
[Sun Jun 23 10:37:02 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun 23 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src23.csv
[Sun Jun 23 10:37:02 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun 23 10:37:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src23.csv
[Sun Jun 23 10:37:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:37:03 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun 23 10:37:03 2013] fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun 23 10:37:03 2013] Fit fullrun_mos1_xmm0553180101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Jun 23 10:37:18 2013] Spatial fit model total counts = 271.354000, observed total counts = 270.000000
[Sun Jun 23 10:37:18 2013] Offset between fit and detection position for source 13 = 0.262139 pixels
[Sun Jun 23 10:37:18 2013] 274.644700 total counts/ 236.745000 bgd. counts: snr = 2.463176
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.262139 pixels
  Position = (331.8, 452.1) = 20 10 3.83 -56 12 14.7
  Extent = 4.8 (3.2-7.9)", rotation angle = 0
  Source counts = 37.9 +/- 16.6
  Background counts = 236.7
  Rate = 0.0008 +/- 0.0003
[Sun Jun 23 10:37:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 10:37:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 10:37:18 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 10:37:18 2013] Source does appear to be extended
[Sun Jun 23 10:37:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:37:45 2013] XMMSAS src. selection expression = ellipse(28818.874200, 39282.779600, 285.619808, 285.619808, 0.000000, X, Y)
[Sun Jun 23 10:37:45 2013] Not overwriting source region fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 23 10:37:45 2013] Extracting stamp from image fullrun_mos1_xmm0553180101_pi300-10000_cl_sm2.00.img.gz, (315, 436) - (348, 468)
[Sun Jun 23 10:37:45 2013] XMMSAS bgd. selection expression = annulus(28818.874200, 39282.779600, 476.033014, 952.066027, X, Y)
[Sun Jun 23 10:37:45 2013] Writing fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13.gif
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/events/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0553180101/products/events/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Jun 23 10:37:46 2013] Mean detx,y = (12234.68, -2184.71) 
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/images/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0553180101/products/images/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/spectra/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0553180101/products/spectra/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Jun 23 10:37:46 2013] Setting source spectrum file to fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 23 10:37:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 23 10:37:46 2013] ../../xmm0553180101/products/lightcurves/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0553180101/products/lightcurves/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Jun 23 10:37:50 2013] Not generating rmf since there are only 37 counts
[Sun Jun 23 10:37:50 2013] rmf not generated due to insufficient counts
[Sun Jun 23 10:37:50 2013] fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Sun Jun 23 11:05:38 2013] Updating aperture counts using extracted products
[Sun Jun 23 11:05:38 2013] Total counts from fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 66.00
[Sun Jun 23 11:05:38 2013] Total counts from fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 203.00
[Sun Jun 23 11:05:38 2013] Got source and background scale factors 256000.000000, 1966936.000000
[Sun Jun 23 11:05:38 2013] User source parameters:
  Position = (331.8, 452.1) = 20 10 3.83 -56 12 14.7
  Extent = 4.8 (3.2-7.9)", rotation angle = 0
  Source aperture counts = 39.6 +/- 9.2
  Background aperture counts = 26.4
  Rate = 0.0008 +/- 0.0002

[Sun Jun 23 11:05:40 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 11:05:40 2013] Using photon index=1.80, rate=0.000762, arf fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13.arf
[Sun Jun 23 11:05:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 11:05:40 2013] Updating source flux to 1.9e-14
[Sun Jun 23 11:05:47 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 11:05:50 2013] xmm0553180101/analysis//spectral/fullrun_mos1_xmm0553180101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete