[Sat Dec 17 14:14:29 2011] Detection parameters:
  Position = (210.2, 303.8) = 12 49 32.52 -11 22 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1478.9 +/- 49.1
  Background counts = 110.6
  Rate = 0.03 +/- 0.0009

[Sat Dec 17 14:14:31 2011] Off-axis axis estimate = 6.41'
[Sat Dec 17 14:19:38 2011] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 14:19:38 2011] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Dec 17 14:19:38 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.848
[Sat Dec 17 14:19:38 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 9.63"
[Sat Dec 17 15:25:56 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Dec 17 15:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src5.csv
[Sat Dec 17 15:25:56 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Dec 17 15:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src5.csv
[Sat Dec 17 15:25:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 15:25:56 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Dec 17 15:25:56 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Dec 17 15:25:56 2011] Fit fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Dec 17 17:12:25 2011] Spatial fit model total counts = 2292.000000, observed total counts = 2292.000000
[Sat Dec 17 17:12:25 2011] Offset between fit and detection position for source 5 = 0.127334 pixels
[Sat Dec 17 17:12:25 2011] 2296.320000 total counts/ 1239.980000 bgd. counts: snr = 29.998282
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.127334 pixels
  Position = (210.2, 303.7) = 12 49 32.54 -11 22 31.3
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1056.3 +/- 47.9
  Background counts = 1240.0
  Rate = 0.01 +/- 0.0006
[Sat Dec 17 17:12:25 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:12:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:12:25 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:12:25 2011] Source does appear to be extended
[Sat Dec 17 17:12:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:12:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 17:12:52 2011] Initial guess for spatial extent in simple fitting = 5.77"
[Sat Dec 17 17:12:52 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.900
[Sat Dec 17 17:12:52 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 5.77"
[Sat Dec 17 18:25:15 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Dec 17 18:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src5.csv
[Sat Dec 17 18:25:15 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Dec 17 18:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src5.csv
[Sat Dec 17 18:25:15 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 18:25:16 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Dec 17 18:25:16 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Dec 17 18:25:16 2011] Fit fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Dec 17 20:05:24 2011] Spatial fit model total counts = 2298.000000, observed total counts = 2298.000000
[Sat Dec 17 20:05:24 2011] Offset between fit and detection position for source 5 = 0.005926 pixels
[Sat Dec 17 20:05:24 2011] 2306.570000 total counts/ 1249.180000 bgd. counts: snr = 29.917320
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.005926 pixels
  Position = (210.2, 303.7) = 12 49 32.54 -11 22 31.3
  Extent = 5.8 (5.5-6.1)", rotation angle = 0
  Source counts = 1057.4 +/- 48.0
  Background counts = 1249.2
  Rate = 0.01 +/- 0.0006
[Sat Dec 17 20:05:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 20:05:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 20:05:24 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 20:05:24 2011] Source does appear to be extended
[Sat Dec 17 20:05:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 20:05:50 2011] Counts = 1057.390000, rescaling region sizes by 2.000000
[Sat Dec 17 20:05:50 2011] XMMSAS src. selection expression = ellipse(18237.460780, 26369.235000, 693.573620, 693.573620, 0.000000, X, Y)
[Sat Dec 17 20:05:50 2011] Writing source region out to fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src5_src.reg
[Sat Dec 17 20:05:50 2011] Extracting stamp from image fullrun_pn_xmm0553030101_pi300-10000_cl_sm2.00.img.gz, (170, 264) - (250, 344)
[Sat Dec 17 20:05:50 2011] XMMSAS bgd. selection expression = annulus(18237.460780, 26369.235000, 2311.912067, 4623.824133, X, Y) && !ellipse(21390.679000, 22203.943000, 470.547214, 470.547214, 0.000000, X, Y) && !ellipse(18931.409360, 24544.959400, 454.679108, 454.679108, 0.000000, X, Y) && !ellipse(19760.846800, 28437.012800, 349.000010, 349.000010, 0.000000, X, Y) && !ellipse(14501.189316, 26937.929321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15324.417000, 27696.600400, 604.559217, 604.559217, 0.000000, X, Y) && !ellipse(22317.263503, 24472.669197, 832.104024, 455.549322, 75.616334, X, Y) && !ellipse(16929.700806, 23099.797729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23094.781772, 22638.220800, 519.279706, 519.279706, 0.000000, X, Y)
[Sat Dec 17 20:05:50 2011] Writing fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src5.gif
[Sat Dec 17 20:13:26 2011] Mean detx,y = (5932.33, 4680.17) 
[Sat Dec 17 20:13:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:14:40 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:14:41 2011] Setting source spectrum file to fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Dec 17 20:14:41 2011] Setting bgd. spectrum file to fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Dec 17 23:53:21 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:53:21 2011] Error reading totcts from fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Dec 17 23:53:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:53:24 2011] Using photon index=1.80, rate=0.0138, arf fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src5.arf
[Sat Dec 17 23:53:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:53:24 2011] Updating source flux to 4.5e-14