[Sat Dec 17 14:14:30 2011] Detection parameters:
  Position = (300.4, 414.7) = 12 49 5.86 -11 14 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.0 +/- 21.9
  Background counts = 97.6
  Rate = 0.002 +/- 0.0003

[Sat Dec 17 14:14:31 2011] Off-axis axis estimate = 8.43'
[Sat Dec 17 14:19:38 2011] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 14:19:38 2011] Initial guess for spatial extent in simple fitting = 10.64"
[Sat Dec 17 14:19:38 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Sat Dec 17 14:19:38 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 10.64"
[Sat Dec 17 15:25:56 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src15.ximg exists
[Sat Dec 17 15:25:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src15.csv
[Sat Dec 17 15:25:56 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Dec 17 15:25:56 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src15.csv
[Sat Dec 17 15:25:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 15:25:57 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Dec 17 15:25:57 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Dec 17 15:25:57 2011] Fit fullrun_pn_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Dec 17 17:12:25 2011] Spatial fit model total counts = 1176.000000, observed total counts = 1176.000000
[Sat Dec 17 17:12:25 2011] Offset between fit and detection position for source 17 = 0.197172 pixels
[Sat Dec 17 17:12:25 2011] 1165.943000 total counts/ 1051.000000 bgd. counts: snr = 3.545530
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.197172 pixels
  Position = (300.2, 414.6) = 12 49 5.92 -11 14 28.6
  Extent = 6.0 (4.0-8.8)", rotation angle = 0
  Source counts = 114.9 +/- 34.1
  Background counts = 1051.0
  Rate = 0.002 +/- 0.0004
[Sat Dec 17 17:12:25 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:12:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:12:25 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:12:25 2011] Source does appear to be extended
[Sat Dec 17 17:12:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:12:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 17:12:52 2011] Initial guess for spatial extent in simple fitting = 6.01"
[Sat Dec 17 17:12:52 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.130
[Sat Dec 17 17:12:52 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 6.01"
[Sat Dec 17 18:25:15 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Dec 17 18:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src15.csv
[Sat Dec 17 18:25:15 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Dec 17 18:25:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src15.csv
[Sat Dec 17 18:25:15 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 18:25:16 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Dec 17 18:25:16 2011] fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Dec 17 18:25:16 2011] Fit fullrun_pn_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Dec 17 20:05:24 2011] Spatial fit model total counts = 1161.980000, observed total counts = 1162.000000
[Sat Dec 17 20:05:24 2011] Offset between fit and detection position for source 17 = 0.099940 pixels
[Sat Dec 17 20:05:24 2011] 1156.982000 total counts/ 1019.450000 bgd. counts: snr = 4.307455
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.099940 pixels
  Position = (300.2, 414.6) = 12 49 5.90 -11 14 29.0
  Extent = 7.0 (4.4-10.2)", rotation angle = 0
  Source counts = 137.5 +/- 34.0
  Background counts = 1019.5
  Rate = 0.002 +/- 0.0004
[Sat Dec 17 20:05:24 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 20:05:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 20:05:24 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 20:05:24 2011] Source does appear to be extended
[Sat Dec 17 20:05:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 20:05:50 2011] XMMSAS src. selection expression = ellipse(26070.283320, 36018.014000, 422.876685, 422.876685, 0.000000, X, Y)
[Sat Dec 17 20:05:50 2011] Writing source region out to fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src17_src.reg
[Sat Dec 17 20:05:50 2011] Extracting stamp from image fullrun_pn_xmm0553030101_pi300-10000_cl_sm2.00.img.gz, (276, 390) - (325, 439)
[Sat Dec 17 20:05:51 2011] XMMSAS bgd. selection expression = annulus(26070.283320, 36018.014000, 704.794475, 1409.588949, X, Y)
[Sat Dec 17 20:05:51 2011] Writing fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src17.gif
[Sat Dec 17 20:25:18 2011] Mean detx,y = (-4868.34, 10812.56) 
[Sat Dec 17 20:25:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:25:42 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:25:42 2011] Setting source spectrum file to fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 17 20:25:42 2011] Setting bgd. spectrum file to fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Dec 17 23:53:21 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:53:21 2011] Error reading totcts from fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 17 23:53:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:53:25 2011] Using photon index=1.80, rate=0.0018, arf fullrun_pn_xmm0553030101_pi300-10000_pass1_cl_src17.arf
[Sat Dec 17 23:53:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:53:25 2011] Updating source flux to 9.7e-15