[Sat Dec 17 14:15:36 2011] Detection parameters:
  Position = (296.7, 374.4) = 12 49 6.94 -11 17 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 12.4
  Background counts = 33.2
  Rate = 0.001 +/- 0.0002

[Sat Dec 17 14:15:37 2011] Off-axis axis estimate = 5.51'
[Sat Dec 17 16:10:37 2011] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 16:10:37 2011] Initial guess for spatial extent in simple fitting = 9.18"
[Sat Dec 17 16:10:37 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Sat Dec 17 16:10:37 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 9.18"
[Sat Dec 17 17:12:14 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_src29.ximg exists
[Sat Dec 17 17:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_src29.csv
[Sat Dec 17 17:12:14 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Dec 17 17:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_src29.csv
[Sat Dec 17 17:12:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:12:14 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Dec 17 17:12:14 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Dec 17 17:12:14 2011] Fit fullrun_mos2_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Dec 17 17:12:39 2011] Warning, spatial fit 29 centroid is now closest to src. 8
[Sat Dec 17 17:12:39 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:12:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:12:39 2011] Assessing source extent using major
[Sat Dec 17 17:12:39 2011] Source does appear to be extended
[Sat Dec 17 17:12:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:02:36 2011] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 19:02:36 2011] Initial guess for spatial extent in simple fitting = 9.18"
[Sat Dec 17 19:02:36 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.917
[Sat Dec 17 19:02:36 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 9.18"
[Sat Dec 17 20:05:13 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_src29.ximg exists
[Sat Dec 17 20:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_src29.csv
[Sat Dec 17 20:05:13 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Dec 17 20:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_src29.csv
[Sat Dec 17 20:05:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 20:05:13 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Dec 17 20:05:14 2011] fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Dec 17 20:05:14 2011] Fit fullrun_mos2_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sat Dec 17 20:05:37 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 49.370878 pixels away
[Sat Dec 17 20:05:37 2011] Spatial fit model total counts = 497.370000, observed total counts = 501.000000
[Sat Dec 17 20:05:37 2011] Offset between fit and detection position for source 7 = 7.295320 pixels
[Sat Dec 17 20:05:37 2011] 488.971000 total counts/ 272.609000 bgd. counts: snr = 13.104211
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 7.295320 pixels
  Position = (292.3, 380.2) = 12 49 8.26 -11 16 58.4
  Extent = 18.4 (18.3-36.7)", rotation angle = 0
  Source counts = 216.4 +/- 22.1
  Background counts = 272.6
  Rate = 0.003 +/- 0.0003
[Sat Dec 17 20:05:37 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 20:05:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 20:05:37 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 20:05:37 2011] Source does appear to be extended
[Sat Dec 17 20:05:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 22:31:30 2011] XMMSAS src. selection expression = ellipse(25377.478000, 33028.952000, 1102.104032, 1102.104032, 0.000000, X, Y)
[Sat Dec 17 22:31:30 2011] Writing source region out to fullrun_mos2_xmm0553030101_pi300-10000_pass1_cl_src7_src.reg
[Sat Dec 17 22:31:30 2011] Extracting stamp from image fullrun_mos2_xmm0553030101_pi300-10000_cl_sm2.00.img.gz, (229, 317) - (356, 444)
[Sat Dec 17 22:31:30 2011] XMMSAS bgd. selection expression = annulus(25377.478000, 33028.952000, 1836.840053, 3673.680106, X, Y) && !ellipse(26172.444400, 31922.561600, 581.060017, 581.060017, 0.000000, X, Y) && !ellipse(26044.355240, 36026.082000, 405.584012, 405.584012, 0.000000, X, Y) && !ellipse(28821.268040, 34611.340200, 404.583212, 404.583212, 0.000000, X, Y) && !ellipse(28088.993400, 30668.995600, 320.866409, 320.866409, 0.000000, X, Y) && !ellipse(29363.019806, 30178.071320, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 22:31:30 2011] Writing fullrun_mos2_xmm0553030101_pi300-10000_pass1_cl_src7.gif
[Sat Dec 17 22:46:58 2011] Mean detx,y = (3201.49, -8393.32) 
[Sat Dec 17 22:47:01 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 22:47:53 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 22:47:54 2011] Setting source spectrum file to fullrun_mos2_xmm0553030101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 17 22:47:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0553030101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Dec 17 23:53:32 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:53:32 2011] Error reading totcts from fullrun_mos2_xmm0553030101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Dec 17 23:53:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:53:35 2011] Using photon index=1.80, rate=0.00266, arf fullrun_mos2_xmm0553030101_pi300-10000_pass1_cl_src7.arf
[Sat Dec 17 23:53:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:53:35 2011] Updating source flux to 3.6e-14