[Sat Dec 17 14:14:57 2011] Detection parameters:
  Position = (189.3, 163.6) = 12 49 38.74 -11 32 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 13.0
  Background counts = 34.7
  Rate = 0.0008 +/- 0.0002

[Sat Dec 17 14:14:57 2011] Off-axis axis estimate = 12.58'
[Sat Dec 17 15:25:57 2011] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 15:25:57 2011] Initial guess for spatial extent in simple fitting = 12.72"
[Sat Dec 17 15:25:57 2011] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.024
[Sat Dec 17 15:25:57 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 12.72"
[Sat Dec 17 16:10:37 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_src31.ximg exists
[Sat Dec 17 16:10:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_src31.csv
[Sat Dec 17 16:10:37 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Dec 17 16:10:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_src31.csv
[Sat Dec 17 16:10:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 16:10:37 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Dec 17 16:10:37 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Dec 17 16:10:37 2011] Fit fullrun_mos1_xmm0553030101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Dec 17 17:12:31 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.886223 pixels away
[Sat Dec 17 17:12:31 2011] Spatial fit model total counts = 445.532000, observed total counts = 445.000000
[Sat Dec 17 17:12:31 2011] Offset between fit and detection position for source 30 = 0.319805 pixels
[Sat Dec 17 17:12:31 2011] 441.730000 total counts/ 398.950000 bgd. counts: snr = 2.141813
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.319805 pixels
  Position = (189.6, 163.6) = 12 49 38.65 -11 32 40.6
  Extent = 5.2 (3.6-6.7)", rotation angle = 0
  Source counts = 42.8 +/- 21.0
  Background counts = 398.9
  Rate = 0.0005 +/- 0.0003
[Sat Dec 17 17:12:31 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:12:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:12:31 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:12:31 2011] Source does appear to be extended
[Sat Dec 17 17:12:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 18:25:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 18:25:16 2011] Initial guess for spatial extent in simple fitting = 5.16"
[Sat Dec 17 18:25:16 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.791
[Sat Dec 17 18:25:16 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 5.16"
[Sat Dec 17 19:02:36 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass1_src31.ximg exists
[Sat Dec 17 19:02:36 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Dec 17 19:02:36 2011] Fit fullrun_mos1_xmm0553030101_pi300-10000_cl_pass1_src31 appears to have run properly
[Sat Dec 17 19:02:36 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Dec 17 19:02:36 2011] fullrun_mos1_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Dec 17 19:02:36 2011] Fit fullrun_mos1_xmm0553030101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Dec 17 20:05:29 2011] Spatial fit model total counts = 355.000000, observed total counts = 355.000000
[Sat Dec 17 20:05:29 2011] Offset between fit and detection position for source 30 = 0.040254 pixels
[Sat Dec 17 20:05:29 2011] 337.034000 total counts/ 289.715000 bgd. counts: snr = 2.780034
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.040254 pixels
  Position = (189.6, 163.6) = 12 49 38.65 -11 32 40.7
  Extent = 5.4 (3.9-7.1)", rotation angle = 0
  Source counts = 47.3 +/- 18.4
  Background counts = 289.7
  Rate = 0.0006 +/- 0.0002
[Sat Dec 17 20:05:29 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 20:05:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 20:05:29 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 20:05:29 2011] Source does appear to be extended
[Sat Dec 17 20:05:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 21:56:42 2011] XMMSAS src. selection expression = ellipse(16444.640000, 14180.645800, 322.691409, 322.691409, 0.000000, X, Y)
[Sat Dec 17 21:56:42 2011] Writing source region out to fullrun_mos1_xmm0553030101_pi300-10000_pass1_cl_src30_src.reg
[Sat Dec 17 21:56:42 2011] Extracting stamp from image fullrun_mos1_xmm0553030101_pi300-10000_cl_sm2.00.img.gz, (171, 145) - (208, 182)
[Sat Dec 17 21:56:42 2011] XMMSAS bgd. selection expression = annulus(16444.640000, 14180.645800, 537.819015, 1075.638031, X, Y) && !ellipse(14805.324249, 13016.721283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16471.846313, 15456.025467, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 21:56:42 2011] Writing fullrun_mos1_xmm0553030101_pi300-10000_pass1_cl_src30.gif
[Sat Dec 17 22:06:50 2011] Mean detx,y = (6145.03, 11671.80) 
[Sat Dec 17 22:06:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 22:06:58 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 22:06:58 2011] Setting source spectrum file to fullrun_mos1_xmm0553030101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Dec 17 22:06:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0553030101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Dec 17 22:31:02 2011] Not generating rmf since there are only 47 counts
[Sat Dec 17 22:31:02 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:53:29 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:53:29 2011] Error reading totcts from fullrun_mos1_xmm0553030101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Dec 17 23:53:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:53:31 2011] Using photon index=1.80, rate=0.000582, arf fullrun_mos1_xmm0553030101_pi300-10000_pass1_cl_src30.arf
[Sat Dec 17 23:53:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:53:31 2011] Updating source flux to 1.4e-14
[Sat Dec 17 23:53:38 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting