[Sun Mar 25 10:27:25 2012] Detection parameters:
  Position = (291.4, 287.4) = 5 1 4.11 45 17 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.8 +/- 29.8
  Background counts = 19.8
  Rate = 0.02 +/- 0.001

[Sun Mar 25 10:27:26 2012] Off-axis axis estimate = 0.95'
[Sun Mar 25 11:16:11 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 11:16:11 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun Mar 25 11:16:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.689
[Sun Mar 25 11:16:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.90"
[Sun Mar 25 14:40:08 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Mar 25 14:40:08 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Mar 25 14:40:08 2012] Fit fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun Mar 25 14:40:08 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Mar 25 14:40:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar 25 14:40:08 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Mar 25 14:40:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Mar 25 14:40:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552971101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 15:01:45 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Sun Mar 25 15:01:45 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 15:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 15:01:45 2012] Assessing source extent using major
[Sun Mar 25 15:01:45 2012] Source does appear to be extended
[Sun Mar 25 15:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 15:03:43 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 15:03:43 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Sun Mar 25 15:03:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.689
[Sun Mar 25 15:03:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.90"
[Sun Mar 25 19:41:41 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Mar 25 19:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 19:41:41 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Mar 25 19:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_src3.csv
[Sun Mar 25 19:41:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:41:41 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Mar 25 19:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Mar 25 19:41:41 2012] fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Mar 25 19:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Mar 25 19:41:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552971101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 25 19:58:25 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Sun Mar 25 19:58:25 2012] Vigneting correction estimate = 1.000000
[Sun Mar 25 19:58:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 25 19:58:25 2012] Assessing source extent using major
[Sun Mar 25 19:58:25 2012] Source does appear to be extended
[Sun Mar 25 19:58:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 25 20:36:43 2012] XMMSAS src. selection expression = ellipse(25301.860443, 24955.591522, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 25 20:36:43 2012] Writing source region out to fullrun_mos1_xmm0552971101_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar 25 20:36:43 2012] Extracting stamp from image fullrun_mos1_xmm0552971101_pi300-10000_cl_sm2.00.img.gz, (254, 250) - (329, 325)
[Sun Mar 25 20:36:43 2012] XMMSAS bgd. selection expression = annulus(25301.860443, 24955.591522, 1087.500000, 2175.000000, X, Y) && !ellipse(24783.039200, 24188.120400, 1356.379239, 1356.379239, 0.000000, X, Y) && !ellipse(24685.652039, 23702.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24641.448456, 24913.843842, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 25 20:36:43 2012] Writing fullrun_mos1_xmm0552971101_pi300-10000_pass1_cl_src4.gif
[Sun Mar 25 20:42:00 2012] Mean detx,y = (-169.56, -559.41) 
[Sun Mar 25 20:42:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 25 20:42:31 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 25 20:42:31 2012] Setting source spectrum file to fullrun_mos1_xmm0552971101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 25 20:42:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552971101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar 25 21:13:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 25 21:13:28 2012] rmf not generated due to insufficient counts
[Sun Mar 25 21:21:37 2012] Updating aperture counts using extracted products
[Sun Mar 25 21:21:38 2012] Error reading totcts from fullrun_mos1_xmm0552971101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar 25 21:21:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 25 21:21:38 2012] Using photon index=1.80, rate=0.0162, arf fullrun_mos1_xmm0552971101_pi300-10000_pass1_cl_src4.arf
[Sun Mar 25 21:21:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 25 21:21:38 2012] Updating source flux to 2e-13
[Sun Mar 25 21:21:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting