[Thu Jul  5 10:28:39 2012] Detection parameters:
  Position = (272.9, 420.0) = 18 38 15.24 -6 47 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 525.0 +/- 30.2
  Background counts = 35.9
  Rate = 0.02 +/- 0.0009

[Thu Jul  5 10:28:39 2012] Off-axis axis estimate = 9.00'
[Thu Jul  5 11:28:53 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 11:28:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 11:28:53 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Thu Jul  5 11:28:53 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Thu Jul  5 11:28:53 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.93"
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul  5 12:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src2.csv
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul  5 12:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src2.csv
[Thu Jul  5 12:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul  5 12:04:24 2012] Fit fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jul  5 12:04:36 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.010114 pixels away
[Thu Jul  5 12:04:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:36 2012] Assessing source extent using major
[Thu Jul  5 12:04:36 2012] Source does appear to be extended
[Thu Jul  5 12:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:45:45 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:45:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 12:45:45 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Thu Jul  5 12:45:45 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Thu Jul  5 12:45:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.93"
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul  5 13:17:44 2012] Fit fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul  5 13:17:44 2012] Fit fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul  5 13:17:51 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.449671 pixels away
[Thu Jul  5 13:17:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:17:51 2012] Assessing source extent using major
[Thu Jul  5 13:17:51 2012] Source does appear to be extended
[Thu Jul  5 13:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 14:03:49 2012] XMMSAS src. selection expression = ellipse(23695.429657, 36489.468903, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul  5 14:03:49 2012] Writing source region out to fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src7_src.reg
[Thu Jul  5 14:03:49 2012] Extracting stamp from image fullrun_mos2_xmm0552950101_pi300-10000_cl_sm2.00.img.gz, (235, 382) - (310, 457)
[Thu Jul  5 14:03:49 2012] XMMSAS bgd. selection expression = annulus(23695.429657, 36489.468903, 1087.500000, 2175.000000, X, Y) && !ellipse(23204.443226, 35494.607436, 396.652447, 371.671278, 0.000000, X, Y)
[Thu Jul  5 14:03:49 2012] Writing fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src7.gif
[Thu Jul  5 14:04:12 2012] Mean detx,y = (4943.63, 8516.96) 
[Thu Jul  5 14:04:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 14:04:31 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 14:04:32 2012] Setting source spectrum file to fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul  5 14:04:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jul  5 14:14:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul  5 14:14:22 2012] rmf not generated due to insufficient counts
[Thu Jul  5 14:18:13 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:18:13 2012] Error reading totcts from fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul  5 14:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:18:13 2012] Using photon index=1.80, rate=0.0161, arf fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src7.arf
[Thu Jul  5 14:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:18:13 2012] Updating source flux to 3.2e-13
[Thu Jul  5 14:20:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting