[Thu Jul  5 10:28:39 2012] Detection parameters:
  Position = (314.1, 315.2) = 18 38 3.21 -6 55 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10661.6 +/- 123.3
  Background counts = 48.3
  Rate = 0.2 +/- 0.002

[Thu Jul  5 10:28:39 2012] Off-axis axis estimate = 1.66'
[Thu Jul  5 11:28:53 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 11:28:53 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Jul  5 11:28:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Jul  5 11:28:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 12:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 12:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 12:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 12:04:24 2012] Fit fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 12:04:36 2012] Spatial fit model total counts = 10876.500000, observed total counts = 10345.000000
[Thu Jul  5 12:04:36 2012] Offset between fit and detection position for source 2 = 0.232763 pixels
[Thu Jul  5 12:04:36 2012] 10944.240000 total counts/ 3990.390000 bgd. counts: snr = 110.082338
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.232763 pixels
  Position = (313.9, 315.4) = 18 38 3.26 -6 55 32.9
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 6953.9 +/- 104.6
  Background counts = 3990.4
  Rate = 0.1 +/- 0.002
[Thu Jul  5 12:04:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:36 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 12:04:36 2012] Source does appear to be extended
[Thu Jul  5 12:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:45:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:45:45 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Thu Jul  5 12:45:45 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.038
[Thu Jul  5 12:45:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.22"
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 13:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 13:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 13:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 13:17:44 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 13:17:44 2012] Fit fullrun_mos2_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 13:17:51 2012] Spatial fit model total counts = 10897.900000, observed total counts = 10345.000000
[Thu Jul  5 13:17:51 2012] Offset between fit and detection position for source 2 = 0.000833 pixels
[Thu Jul  5 13:17:51 2012] 10966.250000 total counts/ 3991.320000 bgd. counts: snr = 110.403179
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000833 pixels
  Position = (313.9, 315.4) = 18 38 3.26 -6 55 32.9
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 6974.9 +/- 104.7
  Background counts = 3991.3
  Rate = 0.1 +/- 0.002
[Thu Jul  5 13:17:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:17:51 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 13:17:51 2012] Source does appear to be extended
[Thu Jul  5 13:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 14:03:49 2012] Counts = 6974.930000, rescaling region sizes by 2.000000
[Thu Jul  5 14:03:49 2012] XMMSAS src. selection expression = ellipse(27264.425340, 27389.731200, 626.412018, 626.412018, 0.000000, X, Y)
[Thu Jul  5 14:03:49 2012] Writing source region out to fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul  5 14:03:49 2012] Extracting stamp from image fullrun_mos2_xmm0552950101_pi300-10000_cl_sm2.00.img.gz, (278, 279) - (350, 351)
[Thu Jul  5 14:03:49 2012] XMMSAS bgd. selection expression = annulus(27264.425340, 27389.731200, 2088.040060, 4176.080120, X, Y) && !ellipse(30728.079224, 29544.015808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27848.569855, 26590.399261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28827.022491, 29846.054596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.000000, 27527.829041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29790.448480, 25526.875800, 404.176012, 404.176012, 0.000000, X, Y) && !ellipse(28047.933350, 27005.717529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28202.264893, 28030.954437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26021.832703, 27795.142700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29178.933350, 26191.382874, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 14:03:49 2012] Writing fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2.gif
[Thu Jul  5 14:03:53 2012] Mean detx,y = (70.33, 24.35) 
[Thu Jul  5 14:03:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 14:04:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 14:04:08 2012] Setting source spectrum file to fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul  5 14:04:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul  5 14:18:13 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:18:13 2012] Error reading totcts from fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul  5 14:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:18:13 2012] Using photon index=1.80, rate=0.113, arf fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2.arf
[Thu Jul  5 14:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:18:13 2012] Updating source flux to 1.2e-12
[Thu Jul  5 14:20:28 2012] Reading fit data from xmm0552950101/analysis//spectral/fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Jul  5 14:20:28 2012] Spectral fit parameter nH value = 6.47092e+22
[Thu Jul  5 14:20:28 2012] Spectral fit parameter PhoIndex value = 1.32528
[Thu Jul  5 14:20:28 2012] Failed to get F(0.3-8.0) from xmm0552950101/analysis//spectral/fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 14:20:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:20:28 2012] Using Nh = 6.5e+22, photon index=1.33, rate=0.113, arf fullrun_mos2_xmm0552950101_pi300-10000_pass1_cl_src2.arf
[Thu Jul  5 14:20:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:20:28 2012] Updating source flux to 3.7e-12