[Thu Jul  5 10:28:39 2012] Detection parameters:
  Position = (403.4, 473.0) = 18 37 37.14 -6 44 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.0 +/- 13.9
  Background counts = 29.4
  Rate = 0.001 +/- 0.0002

[Thu Jul  5 10:28:39 2012] Off-axis axis estimate = 14.77'
[Thu Jul  5 11:28:53 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 11:28:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 11:28:53 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Thu Jul  5 11:28:53 2012] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.999
[Thu Jul  5 11:28:53 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.81"
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jul  5 12:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 12:04:24 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jul  5 12:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 12:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:04:25 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jul  5 12:04:25 2012] fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jul  5 12:04:25 2012] Fit fullrun_mos2_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jul  5 12:04:36 2012] Spatial fit model total counts = 426.991000, observed total counts = 419.000000
[Thu Jul  5 12:04:36 2012] Offset between fit and detection position for source 13 = 0.428019 pixels
[Thu Jul  5 12:04:36 2012] 427.845500 total counts/ 379.593000 bgd. counts: snr = 2.476628
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.428019 pixels
  Position = (403.0, 473.2) = 18 37 37.25 -6 44 6.2
  Extent = 6.1 (3.9-9.6)", rotation angle = 0
  Source counts = 48.3 +/- 20.7
  Background counts = 379.6
  Rate = 0.0008 +/- 0.0003
[Thu Jul  5 12:04:36 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:36 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 12:04:36 2012] Source does appear to be extended
[Thu Jul  5 12:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:04:36 2012] Deleting source due to low Poisson probability 0.9