[Thu Jul  5 10:28:14 2012] Detection parameters:
  Position = (403.6, 473.0) = 18 37 37.09 -6 44 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.8 +/- 14.0
  Background counts = 30.7
  Rate = 0.001 +/- 0.0002

[Thu Jul  5 10:28:14 2012] Off-axis axis estimate = 14.77'
[Thu Jul  5 10:48:28 2012] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:48:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 10:48:28 2012] Initial guess for spatial extent in simple fitting = 13.82"
[Thu Jul  5 10:48:28 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.036
[Thu Jul  5 10:48:28 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 13.82"
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src16.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src16.csv
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src16.csv
[Thu Jul  5 11:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Jul  5 11:28:53 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Jul  5 12:04:31 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.649841 pixels away
[Thu Jul  5 12:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:31 2012] Assessing source extent using major
[Thu Jul  5 12:04:31 2012] Source does appear to be extended
[Thu Jul  5 12:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:06:00 2012] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:06:00 2012] Initial guess for spatial extent in simple fitting = 13.82"
[Thu Jul  5 12:06:00 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.036
[Thu Jul  5 12:06:00 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 13.82"
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jul  5 12:45:45 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src16 appears to have run properly
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jul  5 12:45:45 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Jul  5 13:17:48 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.853414 pixels away
[Thu Jul  5 13:17:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:17:48 2012] Assessing source extent using major
[Thu Jul  5 13:17:48 2012] Source does appear to be extended
[Thu Jul  5 13:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:26:25 2012] XMMSAS src. selection expression = ellipse(35060.606476, 41102.022095, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing source region out to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src6_src.reg
[Thu Jul  5 13:26:25 2012] Extracting stamp from image fullrun_mos1_xmm0552950101_pi300-10000_cl_sm2.00.img.gz, (366, 435) - (441, 510)
[Thu Jul  5 13:26:25 2012] XMMSAS bgd. selection expression = annulus(35060.606476, 41102.022095, 1087.500000, 2175.000000, X, Y) && !ellipse(33667.616150, 38189.056702, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src6.gif
[Thu Jul  5 13:31:01 2012] Mean detx,y = (14921.10, 5523.63) 
[Thu Jul  5 13:31:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 13:31:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 13:31:17 2012] Setting source spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul  5 13:31:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jul  5 13:56:30 2012] Not generating rmf since there are only 84 counts
[Thu Jul  5 13:56:30 2012] rmf not generated due to insufficient counts
[Thu Jul  5 14:18:12 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:18:12 2012] Error reading totcts from fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul  5 14:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:18:13 2012] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src6.arf
[Thu Jul  5 14:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:18:13 2012] Updating source flux to 3.4e-14
[Thu Jul  5 14:18:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting