[Thu Jul  5 10:28:14 2012] Detection parameters:
  Position = (352.8, 245.8) = 18 37 51.89 -7 0 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.5 +/- 19.4
  Background counts = 29.6
  Rate = 0.006 +/- 0.0005

[Thu Jul  5 10:28:14 2012] Off-axis axis estimate = 5.49'
[Thu Jul  5 10:48:28 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:48:28 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Thu Jul  5 10:48:28 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.808
[Thu Jul  5 10:48:28 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.17"
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src6.csv
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src6.csv
[Thu Jul  5 11:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jul  5 11:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:04:31 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.224826 pixels away
[Thu Jul  5 12:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:31 2012] Assessing source extent using major
[Thu Jul  5 12:04:31 2012] Source does appear to be extended
[Thu Jul  5 12:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:06:00 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:06:00 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Thu Jul  5 12:06:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.808
[Thu Jul  5 12:06:00 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.17"
[Thu Jul  5 12:45:44 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jul  5 12:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src6.csv
[Thu Jul  5 12:45:44 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jul  5 12:45:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src6.csv
[Thu Jul  5 12:45:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jul  5 12:45:45 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Jul  5 13:17:48 2012] Spatial fit model total counts = 421.030000, observed total counts = 460.000000
[Thu Jul  5 13:17:48 2012] Offset between fit and detection position for source 23 = 0.367897 pixels
[Thu Jul  5 13:17:48 2012] 427.780000 total counts/ 338.273000 bgd. counts: snr = 4.866574
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.367897 pixels
  Position = (352.7, 245.5) = 18 37 51.94 -7 0 37.0
  Extent = 3.7 (2.7-5.4)", rotation angle = 0
  Source counts = 89.5 +/- 20.7
  Background counts = 338.3
  Rate = 0.001 +/- 0.0003
[Thu Jul  5 13:17:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:17:48 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 13:17:48 2012] Source does appear to be extended
[Thu Jul  5 13:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:26:25 2012] XMMSAS src. selection expression = ellipse(30633.737400, 21307.431200, 219.144606, 219.144606, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing source region out to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src23_src.reg
[Thu Jul  5 13:26:25 2012] Extracting stamp from image fullrun_mos1_xmm0552950101_pi300-10000_cl_sm2.00.img.gz, (340, 233) - (365, 258)
[Thu Jul  5 13:26:25 2012] XMMSAS bgd. selection expression = annulus(30633.737400, 21307.431200, 365.241011, 730.482021, X, Y)
[Thu Jul  5 13:26:25 2012] Writing fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src23.gif
[Thu Jul  5 13:28:14 2012] Mean detx,y = (-5306.72, 3964.92) 
[Thu Jul  5 13:28:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 13:28:23 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 13:28:23 2012] Setting source spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jul  5 13:28:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jul  5 13:48:38 2012] Not generating rmf since there are only 89 counts
[Thu Jul  5 13:48:38 2012] rmf not generated due to insufficient counts
[Thu Jul  5 14:18:12 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:18:12 2012] Error reading totcts from fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jul  5 14:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:18:13 2012] Using photon index=1.80, rate=0.00146, arf fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src23.arf
[Thu Jul  5 14:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:18:13 2012] Updating source flux to 2.9e-14
[Thu Jul  5 14:18:14 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting