[Thu Jul  5 10:28:14 2012] Detection parameters:
  Position = (319.1, 301.8) = 18 38 1.75 -6 56 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.7 +/- 15.7
  Background counts = 51.1
  Rate = 0.001 +/- 0.0003

[Thu Jul  5 10:28:14 2012] Off-axis axis estimate = 1.52'
[Thu Jul  5 10:48:28 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:48:28 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Thu Jul  5 10:48:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Thu Jul  5 10:48:28 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.19"
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jul  5 11:28:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src21.csv
[Thu Jul  5 11:28:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jul  5 11:28:53 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Jul  5 12:04:31 2012] Spatial fit model total counts = 541.383000, observed total counts = 1349.000000
[Thu Jul  5 12:04:31 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  5 12:04:31 2012] Warning, spatial fit 21 centroid is now closest to src. 22
[Thu Jul  5 12:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:31 2012] Assessing source extent using major
[Thu Jul  5 12:04:31 2012] Source does appear to be extended
[Thu Jul  5 12:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:06:00 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:06:00 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Thu Jul  5 12:06:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Thu Jul  5 12:06:00 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.19"
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jul  5 12:45:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src21.csv
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jul  5 12:45:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src21.csv
[Thu Jul  5 12:45:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jul  5 12:45:45 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Jul  5 13:17:48 2012] Spatial fit model total counts = 984.374000, observed total counts = 990.000000
[Thu Jul  5 13:17:48 2012] Offset between fit and detection position for source 20 = 8.843865 pixels
[Thu Jul  5 13:17:48 2012] 989.237000 total counts/ 885.597000 bgd. counts: snr = 3.482646
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 8.843865 pixels
  Position = (325.2, 295.4) = 18 37 59.97 -6 56 59.8
  Extent = 14.4 (14.3-28.7)", rotation angle = 0
  Source counts = 103.6 +/- 31.5
  Background counts = 885.6
  Rate = 0.002 +/- 0.0005
[Thu Jul  5 13:17:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:17:48 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 13:17:48 2012] Source does appear to be extended
[Thu Jul  5 13:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:26:25 2012] XMMSAS src. selection expression = ellipse(28243.688000, 25650.526000, 862.458025, 862.458025, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing source region out to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src20_src.reg
[Thu Jul  5 13:26:25 2012] Extracting stamp from image fullrun_mos1_xmm0552950101_pi300-10000_cl_sm2.00.img.gz, (276, 246) - (375, 345)
[Thu Jul  5 13:26:25 2012] XMMSAS bgd. selection expression = annulus(28243.688000, 25650.526000, 1437.430041, 2874.860083, X, Y) && !ellipse(27270.346506, 27386.082800, 431.325612, 431.325612, 0.000000, X, Y) && !ellipse(26998.928619, 26355.145081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.348511, 27435.927856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.363281, 26386.944366, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src20.gif
[Thu Jul  5 13:32:55 2012] Mean detx,y = (-1310.11, 907.94) 
[Thu Jul  5 13:32:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 13:33:06 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 13:33:06 2012] Setting source spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul  5 13:33:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jul  5 14:18:12 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:18:12 2012] Error reading totcts from fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul  5 14:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:18:13 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src20.arf
[Thu Jul  5 14:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:18:13 2012] Updating source flux to 1.6e-14
[Thu Jul  5 14:18:14 2012] Flag p found in src. 20 procflags, skipping spectral fitting