[Thu Jul  5 10:28:14 2012] Detection parameters:
  Position = (314.2, 315.2) = 18 38 3.19 -6 55 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10888.1 +/- 125.5
  Background counts = 51.6
  Rate = 0.2 +/- 0.002

[Thu Jul  5 10:28:14 2012] Off-axis axis estimate = 1.67'
[Thu Jul  5 10:48:28 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 10:48:28 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Thu Jul  5 10:48:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Thu Jul  5 10:48:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Thu Jul  5 11:28:52 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  5 11:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 11:28:52 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  5 11:28:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src1.csv
[Thu Jul  5 11:28:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  5 11:28:53 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  5 11:28:53 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  5 12:04:31 2012] Spatial fit model total counts = 10309.300000, observed total counts = 10305.000000
[Thu Jul  5 12:04:31 2012] Offset between fit and detection position for source 2 = 0.233579 pixels
[Thu Jul  5 12:04:31 2012] 10331.740000 total counts/ 3169.940000 bgd. counts: snr = 127.202799
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.233579 pixels
  Position = (314.0, 315.3) = 18 38 3.24 -6 55 33.1
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7161.8 +/- 101.6
  Background counts = 3169.9
  Rate = 0.1 +/- 0.002
[Thu Jul  5 12:04:31 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 12:04:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 12:04:31 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 12:04:31 2012] Source does appear to be extended
[Thu Jul  5 12:04:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 12:06:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 12:06:00 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Thu Jul  5 12:06:00 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.991
[Thu Jul  5 12:06:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Thu Jul  5 12:45:44 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  5 12:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 12:45:44 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  5 12:45:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src1.csv
[Thu Jul  5 12:45:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  5 12:45:45 2012] fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  5 12:45:45 2012] Fit fullrun_mos1_xmm0552950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  5 13:17:48 2012] Spatial fit model total counts = 10309.300000, observed total counts = 10305.000000
[Thu Jul  5 13:17:48 2012] Offset between fit and detection position for source 2 = 0.000466 pixels
[Thu Jul  5 13:17:48 2012] 10331.730000 total counts/ 3169.980000 bgd. counts: snr = 127.201108
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000466 pixels
  Position = (314.0, 315.3) = 18 38 3.24 -6 55 33.1
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 7161.8 +/- 101.6
  Background counts = 3170.0
  Rate = 0.1 +/- 0.002
[Thu Jul  5 13:17:48 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 13:17:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 13:17:48 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 13:17:48 2012] Source does appear to be extended
[Thu Jul  5 13:17:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 13:26:25 2012] Counts = 7161.750000, rescaling region sizes by 2.000000
[Thu Jul  5 13:26:25 2012] XMMSAS src. selection expression = ellipse(27270.346506, 27386.082800, 646.988419, 646.988419, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing source region out to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul  5 13:26:25 2012] Extracting stamp from image fullrun_mos1_xmm0552950101_pi300-10000_cl_sm2.00.img.gz, (277, 278) - (351, 353)
[Thu Jul  5 13:26:25 2012] XMMSAS bgd. selection expression = annulus(27270.346506, 27386.082800, 2156.628062, 4313.256124, X, Y) && !ellipse(30707.425000, 29545.267400, 342.170410, 342.170410, 0.000000, X, Y) && !ellipse(28794.652400, 29821.391200, 282.388808, 282.388808, 0.000000, X, Y) && !ellipse(26998.928619, 26355.145081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.348511, 27435.927856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.363281, 26386.944366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28243.688000, 25650.526000, 1149.944033, 1149.944033, 0.000000, X, Y)
[Thu Jul  5 13:26:25 2012] Writing fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2.gif
[Thu Jul  5 13:26:29 2012] Mean detx,y = (239.06, -234.61) 
[Thu Jul  5 13:26:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 13:26:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 13:26:44 2012] Setting source spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul  5 13:26:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul  5 14:18:12 2012] Updating aperture counts using extracted products
[Thu Jul  5 14:18:12 2012] Error reading totcts from fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul  5 14:18:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:18:12 2012] Using photon index=1.80, rate=0.117, arf fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2.arf
[Thu Jul  5 14:18:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:18:12 2012] Updating source flux to 1.2e-12
[Thu Jul  5 14:20:01 2012] Reading fit data from xmm0552950101/analysis//spectral/fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Jul  5 14:20:01 2012] Spectral fit parameter nH value = 6.22489e+22
[Thu Jul  5 14:20:01 2012] Spectral fit parameter PhoIndex value = 1.20323
[Thu Jul  5 14:20:01 2012] Failed to get F(0.3-8.0) from xmm0552950101/analysis//spectral/fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 14:20:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 14:20:01 2012] Using Nh = 6.2e+22, photon index=1.20, rate=0.117, arf fullrun_mos1_xmm0552950101_pi300-10000_pass1_cl_src2.arf
[Thu Jul  5 14:20:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 14:20:01 2012] Updating source flux to 3.6e-12