[Thu Feb 16 10:33:05 2012] Detection parameters:
  Position = (444.5, 193.7) = 2 54 59.73 19 23 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 11.0
  Background counts = 11.7
  Rate = 0.002 +/- 0.0003

[Thu Feb 16 10:33:06 2012] Off-axis axis estimate = 13.03'
[Thu Feb 16 11:46:16 2012] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:46:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 11:46:16 2012] Initial guess for spatial extent in simple fitting = 12.94"
[Thu Feb 16 11:46:16 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Thu Feb 16 11:46:16 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.94"
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Feb 16 12:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src11.csv
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Feb 16 12:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src11.csv
[Thu Feb 16 12:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Feb 16 12:13:33 2012] Fit fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Feb 16 12:13:45 2012] Spatial fit model total counts = 192.955000, observed total counts = 193.000000
[Thu Feb 16 12:13:45 2012] Offset between fit and detection position for source 2 = 0.796039 pixels
[Thu Feb 16 12:13:45 2012] 191.250600 total counts/ 125.307000 bgd. counts: snr = 5.890945
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.796039 pixels
  Position = (445.3, 193.6) = 2 54 59.49 19 23 44.3
  Extent = 10.2 (5.3-15.4)", rotation angle = 0
  Source counts = 65.9 +/- 13.8
  Background counts = 125.3
  Rate = 0.002 +/- 0.0004
[Thu Feb 16 12:13:45 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:13:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:13:45 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 12:13:45 2012] Source does appear to be extended
[Thu Feb 16 12:13:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:09:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 14:09:06 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Thu Feb 16 14:09:06 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.921
[Thu Feb 16 14:09:06 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.24"
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Feb 16 14:37:02 2012] Fit fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Feb 16 14:37:02 2012] Fit fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Feb 16 14:37:09 2012] Spatial fit model total counts = 173.969000, observed total counts = 174.000000
[Thu Feb 16 14:37:09 2012] Offset between fit and detection position for source 2 = 0.529729 pixels
[Thu Feb 16 14:37:09 2012] 171.797400 total counts/ 130.351000 bgd. counts: snr = 3.630192
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.529729 pixels
  Position = (444.8, 193.4) = 2 54 59.64 19 23 43.3
  Extent = 6.8 (4.1-12.6)", rotation angle = 0
  Source counts = 41.4 +/- 13.1
  Background counts = 130.4
  Rate = 0.001 +/- 0.0004
[Thu Feb 16 14:37:09 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 14:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 14:37:09 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 14:37:09 2012] Source does appear to be extended
[Thu Feb 16 14:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 15:19:39 2012] XMMSAS src. selection expression = ellipse(38649.570800, 16776.853400, 406.238588, 406.238588, 0.000000, X, Y)
[Thu Feb 16 15:19:39 2012] Writing source region out to fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src2_src.reg
[Thu Feb 16 15:19:39 2012] Extracting stamp from image fullrun_mos2_xmm0552920101_pi300-10000_cl_sm2.00.img.gz, (421, 170) - (468, 217)
[Thu Feb 16 15:19:39 2012] XMMSAS bgd. selection expression = annulus(38649.570800, 16776.853400, 677.064314, 1354.128628, X, Y)
[Thu Feb 16 15:19:39 2012] Writing fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src2.gif
[Thu Feb 16 15:21:53 2012] Mean detx,y = (16043.26, 3360.30) 
[Thu Feb 16 15:21:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 15:22:05 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 15:22:06 2012] Setting source spectrum file to fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 15:22:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Feb 16 15:35:42 2012] Not generating rmf since there are only 41 counts
[Thu Feb 16 15:35:42 2012] rmf not generated due to insufficient counts
[Thu Feb 16 15:40:19 2012] Updating aperture counts using extracted products
[Thu Feb 16 15:40:19 2012] Error reading totcts from fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 15:40:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:40:20 2012] Using photon index=1.80, rate=0.0012, arf fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 15:40:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:40:20 2012] Updating source flux to 4.9e-14
[Thu Feb 16 15:41:59 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting