[Thu Feb 16 10:33:05 2012] Detection parameters:
  Position = (222.1, 232.8) = 2 56 8.12 19 26 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11349.4 +/- 127.7
  Background counts = 22.9
  Rate = 0.5 +/- 0.005

[Thu Feb 16 10:33:06 2012] Off-axis axis estimate = 7.30'
[Thu Feb 16 11:46:16 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 11:46:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 11:46:16 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Thu Feb 16 11:46:16 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.977
[Thu Feb 16 11:46:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.08"
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 12:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 12:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 12:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 12:13:33 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 12:13:33 2012] Fit fullrun_mos2_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 12:13:45 2012] Warning, spatial fit 1 centroid is now closest to src. 12
[Thu Feb 16 12:13:45 2012] Spatial fit model total counts = 433.582000, observed total counts = 433.000000
[Thu Feb 16 12:13:45 2012] Offset between fit and detection position for source 1 = 4.472870 pixels
[Thu Feb 16 12:13:45 2012] Warning, changing simple spatial fit ID from 1 to 9
[Thu Feb 16 12:13:45 2012] 431.650000 total counts/ 308.711000 bgd. counts: snr = 6.997028
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.472870 pixels
  Position = (225.2, 229.6) = 2 56 7.15 19 26 21.1
  Extent = 10.1 (8.8-11.5)", rotation angle = 0
  Source counts = 122.9 +/- 20.8
  Background counts = 308.7
  Rate = 0.004 +/- 0.0006
[Thu Feb 16 12:13:45 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:13:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:13:45 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 12:13:45 2012] Source does appear to be extended
[Thu Feb 16 12:13:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:09:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 14:09:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 14:09:06 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Thu Feb 16 14:09:06 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Thu Feb 16 14:09:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.10"
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 16 14:37:02 2012] Fit fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 14:37:02 2012] fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 14:37:02 2012] Fit fullrun_mos2_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 14:37:09 2012] Source 1 is offset by -8.563586 and 4.262161 pixels which is larger than
2 X fitted extent = 4.690805 x 4.690805, not incorporating fit results
[Thu Feb 16 14:37:09 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 14:37:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 14:37:09 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 14:37:09 2012] Source does appear to be extended
[Thu Feb 16 14:37:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 15:19:38 2012] XMMSAS src. selection expression = ellipse(19546.118000, 19927.918000, 606.228017, 606.228017, 0.000000, X, Y)
[Thu Feb 16 15:19:38 2012] Writing source region out to fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 16 15:19:38 2012] Extracting stamp from image fullrun_mos2_xmm0552920101_pi300-10000_cl_sm2.00.img.gz, (190, 195) - (260, 264)
[Thu Feb 16 15:19:38 2012] XMMSAS bgd. selection expression = annulus(19546.118000, 19927.918000, 1010.380029, 2020.760058, X, Y) && !ellipse(19175.556900, 18989.761932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20093.212000, 21935.440000, 1548.232045, 1548.232045, 0.000000, X, Y)
[Thu Feb 16 15:19:38 2012] Writing fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1.gif
[Thu Feb 16 15:19:41 2012] Mean detx,y = (-3408.75, 5798.65) 
[Thu Feb 16 15:19:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 15:19:55 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 15:19:55 2012] Setting source spectrum file to fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 15:19:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 16 15:40:19 2012] Updating aperture counts using extracted products
[Thu Feb 16 15:40:19 2012] Error reading totcts from fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 15:40:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:40:20 2012] Using photon index=1.80, rate=0.00355, arf fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 15:40:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:40:20 2012] Updating source flux to 5.2e-14
[Thu Feb 16 15:41:59 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu Feb 16 15:42:49 2012] Reading fit data from xmm0552920101/analysis//spectral/fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 16 15:42:49 2012] Spectral fit parameter nH value = 3.96921e+22
[Thu Feb 16 15:42:49 2012] Spectral fit parameter PhoIndex value = 0.98202
[Thu Feb 16 15:42:49 2012] Failed to get F(0.3-8.0) from xmm0552920101/analysis//spectral/fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 15:42:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:42:49 2012] Using Nh = 4e+22, photon index=0.98, rate=0.00355, arf fullrun_mos2_xmm0552920101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 15:42:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:42:49 2012] Updating source flux to 1.6e-13