[Thu Feb 16 10:33:04 2012] Detection parameters:
  Position = (329.1, 142.6) = 2 55 35.21 19 20 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.0 +/- 13.7
  Background counts = 17.3
  Rate = 0.003 +/- 0.0004

[Thu Feb 16 10:33:04 2012] Off-axis axis estimate = 11.51'
[Thu Feb 16 10:57:29 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 10:57:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 10:57:29 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Thu Feb 16 10:57:29 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Thu Feb 16 10:57:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.19"
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Feb 16 11:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src6.csv
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Feb 16 11:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src6.csv
[Thu Feb 16 11:46:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Feb 16 11:46:16 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Feb 16 12:13:42 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.797692 pixels away
[Thu Feb 16 12:13:42 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:13:42 2012] Assessing source extent using major
[Thu Feb 16 12:13:42 2012] Source does appear to be extended
[Thu Feb 16 12:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:39:49 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:39:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 12:39:49 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Thu Feb 16 12:39:49 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.963
[Thu Feb 16 12:39:49 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.19"
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Feb 16 14:09:06 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Feb 16 14:09:06 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Feb 16 14:37:07 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.797692 pixels away
[Thu Feb 16 14:37:07 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 14:37:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 14:37:07 2012] Assessing source extent using major
[Thu Feb 16 14:37:07 2012] Source does appear to be extended
[Thu Feb 16 14:37:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:56:31 2012] XMMSAS src. selection expression = ellipse(28583.675781, 12359.537811, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 14:56:31 2012] Writing source region out to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src14_src.reg
[Thu Feb 16 14:56:31 2012] Extracting stamp from image fullrun_mos1_xmm0552920101_pi300-10000_cl_sm2.00.img.gz, (292, 105) - (367, 180)
[Thu Feb 16 14:56:31 2012] XMMSAS bgd. selection expression = annulus(28583.675781, 12359.537811, 1087.500000, 2175.000000, X, Y)
[Thu Feb 16 14:56:31 2012] Writing fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src14.gif
[Thu Feb 16 14:58:32 2012] Mean detx,y = (10785.38, -7861.27) 
[Thu Feb 16 14:58:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 14:58:51 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 14:58:51 2012] Setting source spectrum file to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Feb 16 14:58:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Feb 16 15:15:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 15:15:21 2012] rmf not generated due to insufficient counts
[Thu Feb 16 15:40:19 2012] Updating aperture counts using extracted products
[Thu Feb 16 15:40:19 2012] Error reading totcts from fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Feb 16 15:40:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:40:19 2012] Using photon index=1.80, rate=0.00295, arf fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src14.arf
[Thu Feb 16 15:40:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:40:19 2012] Updating source flux to 6.4e-14
[Thu Feb 16 15:40:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting