[Thu Feb 16 10:33:03 2012] Detection parameters:
  Position = (226.4, 238.3) = 2 56 6.79 19 26 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.9 +/- 19.5
  Background counts = 20.9
  Rate = 0.003 +/- 0.0007

[Thu Feb 16 10:33:04 2012] Off-axis axis estimate = 6.80'
[Thu Feb 16 10:57:29 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 10:57:29 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Thu Feb 16 10:57:29 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.624
[Thu Feb 16 10:57:29 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.83"
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Feb 16 11:46:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src5.csv
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Feb 16 11:46:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src5.csv
[Thu Feb 16 11:46:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Feb 16 11:46:16 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Feb 16 12:13:42 2012] Source 10 is offset by 4.306725 and 5.300255 pixels which is larger than
2 X fitted extent = 1.782377 x 1.782377, not incorporating fit results
[Thu Feb 16 12:13:42 2012] Source 10 is offset by 0.727780 and 7.880922 pixels which is larger than
2 X fitted extent = 4.122639 x 4.122639, not incorporating fit results
[Thu Feb 16 12:13:42 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:13:42 2012] Assessing source extent using major
[Thu Feb 16 12:13:42 2012] Source does appear to be extended
[Thu Feb 16 12:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:13:42 2012] Source is confused with source 1
[Thu Feb 16 12:39:49 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:39:49 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Thu Feb 16 12:39:49 2012] source mask rpix=2.3, npix_max = 30, mask sum = 19, frac = 0.624
[Thu Feb 16 12:39:49 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.83"
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Feb 16 14:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src5.csv
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Feb 16 14:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src5.csv
[Thu Feb 16 14:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Feb 16 14:09:06 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Feb 16 14:37:07 2012] Source 10 is offset by 4.309760 and 5.300853 pixels which is larger than
2 X fitted extent = 1.747683 x 1.747683, not incorporating fit results
[Thu Feb 16 14:37:07 2012] Source 10 is offset by 0.650760 and 7.880922 pixels which is larger than
2 X fitted extent = 4.171600 x 4.171600, not incorporating fit results
[Thu Feb 16 14:37:07 2012] Spatial fit model total counts = 784.969000, observed total counts = 785.000000
[Thu Feb 16 14:37:07 2012] Offset between fit and detection position for source 10 = 5.123170 pixels
[Thu Feb 16 14:37:07 2012] Warning, changing simple spatial fit ID from 5 to 11
[Thu Feb 16 14:37:07 2012] 728.646000 total counts/ 510.494000 bgd. counts: snr = 9.655258
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 5.123170 pixels
  Position = (221.3, 238.0) = 2 56 8.36 19 26 57.6
  Extent = 12.1 (9.3-14.6)", rotation angle = 0
  Source counts = 218.2 +/- 27.0
  Background counts = 510.5
  Rate = 0.006 +/- 0.0008
[Thu Feb 16 14:37:07 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 14:37:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 14:37:07 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 14:37:07 2012] Source does appear to be extended
[Thu Feb 16 14:37:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:56:31 2012] XMMSAS src. selection expression = ellipse(19204.962800, 20658.318000, 727.338021, 727.338021, 0.000000, X, Y)
[Thu Feb 16 14:56:31 2012] Writing source region out to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src10_src.reg
[Thu Feb 16 14:56:31 2012] Extracting stamp from image fullrun_mos1_xmm0552920101_pi300-10000_cl_sm2.00.img.gz, (180, 196) - (263, 280)
[Thu Feb 16 14:56:31 2012] XMMSAS bgd. selection expression = annulus(19204.962800, 20658.318000, 1212.230035, 2424.460070, X, Y) && !ellipse(19278.403820, 20215.687000, 434.890413, 434.890413, 0.000000, X, Y) && !ellipse(18083.685394, 20721.247253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18666.168000, 20419.992000, 1655.088048, 1655.088048, 0.000000, X, Y) && !ellipse(19645.312561, 19106.605789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19279.530502, 21381.635345, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 14:56:31 2012] Writing fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src10.gif
[Thu Feb 16 14:58:16 2012] Mean detx,y = (5917.77, 3363.93) 
[Thu Feb 16 14:58:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 14:58:30 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 14:58:30 2012] Setting source spectrum file to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Feb 16 14:58:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Feb 16 15:40:19 2012] Updating aperture counts using extracted products
[Thu Feb 16 15:40:19 2012] Error reading totcts from fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Feb 16 15:40:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:40:19 2012] Using photon index=1.80, rate=0.0063, arf fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src10.arf
[Thu Feb 16 15:40:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:40:19 2012] Updating source flux to 8e-14
[Thu Feb 16 15:40:20 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu Feb 16 15:40:20 2012] Flag c found in src. 10 procflags, skipping spectral fitting