[Thu Feb 16 10:33:02 2012] Detection parameters:
  Position = (222.1, 232.9) = 2 56 8.12 19 26 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12011.4 +/- 129.3
  Background counts = 25.7
  Rate = 0.5 +/- 0.005

[Thu Feb 16 10:33:04 2012] Off-axis axis estimate = 7.29'
[Thu Feb 16 10:57:29 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 10:57:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 10:57:29 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Thu Feb 16 10:57:29 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Thu Feb 16 10:57:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.07"
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 16 11:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 16 11:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src1.csv
[Thu Feb 16 11:46:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 11:46:16 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 11:46:16 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 12:13:42 2012] Spatial fit model total counts = 11770.400000, observed total counts = 11802.000000
[Thu Feb 16 12:13:42 2012] Offset between fit and detection position for source 1 = 0.077077 pixels
[Thu Feb 16 12:13:42 2012] 11405.200000 total counts/ 2309.800000 bgd. counts: snr = 189.249445
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077077 pixels
  Position = (222.2, 232.9) = 2 56 8.10 19 26 35.4
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 9095.4 +/- 106.8
  Background counts = 2309.8
  Rate = 0.3 +/- 0.003
[Thu Feb 16 12:13:42 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 12:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 12:13:42 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 12:13:42 2012] Source does appear to be extended
[Thu Feb 16 12:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 12:13:42 2012] Source is confused with source 10
[Thu Feb 16 12:13:42 2012] Source is confused with source 8
[Thu Feb 16 12:39:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 12:39:49 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Thu Feb 16 12:39:49 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.211
[Thu Feb 16 12:39:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 16 14:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 16 14:09:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src1.csv
[Thu Feb 16 14:09:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 16 14:09:06 2012] fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 16 14:09:06 2012] Fit fullrun_mos1_xmm0552920101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 14:37:07 2012] Spatial fit model total counts = 11398.000000, observed total counts = 11456.000000
[Thu Feb 16 14:37:07 2012] Offset between fit and detection position for source 1 = 0.018824 pixels
[Thu Feb 16 14:37:07 2012] 9984.860000 total counts/ 1225.260000 bgd. counts: snr = 250.247730
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018824 pixels
  Position = (222.1, 232.9) = 2 56 8.10 19 26 35.5
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8759.6 +/- 99.9
  Background counts = 1225.3
  Rate = 0.3 +/- 0.003
[Thu Feb 16 14:37:07 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 14:37:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 14:37:07 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 14:37:07 2012] Source does appear to be extended
[Thu Feb 16 14:37:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 14:56:31 2012] Counts = 8759.600000, rescaling region sizes by 2.000000
[Thu Feb 16 14:56:31 2012] XMMSAS src. selection expression = ellipse(19278.403820, 20215.687000, 652.335619, 652.335619, 0.000000, X, Y)
[Thu Feb 16 14:56:31 2012] Writing source region out to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 16 14:56:31 2012] Extracting stamp from image fullrun_mos1_xmm0552920101_pi300-10000_cl_sm2.00.img.gz, (185, 195) - (260, 270)
[Thu Feb 16 14:56:31 2012] XMMSAS bgd. selection expression = annulus(19278.403820, 20215.687000, 2174.452063, 4348.904125, X, Y) && !ellipse(18083.685394, 20721.247253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19204.962800, 20658.318000, 969.784028, 969.784028, 0.000000, X, Y) && !ellipse(18666.168000, 20419.992000, 1655.088048, 1655.088048, 0.000000, X, Y) && !ellipse(14341.243713, 21548.137543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19645.312561, 19106.605789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19279.530502, 21381.635345, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 14:56:31 2012] Writing fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1.gif
[Thu Feb 16 14:56:34 2012] Mean detx,y = (5962.96, 3330.15) 
[Thu Feb 16 14:56:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 14:57:22 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 14:57:22 2012] Setting source spectrum file to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 14:57:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 16 15:40:19 2012] Updating aperture counts using extracted products
[Thu Feb 16 15:40:19 2012] Error reading totcts from fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 15:40:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:40:19 2012] Using photon index=1.80, rate=0.253, arf fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 15:40:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:40:19 2012] Updating source flux to 3e-12
[Thu Feb 16 15:40:20 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Feb 16 15:41:59 2012] Reading fit data from xmm0552920101/analysis//spectral/fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 16 15:41:59 2012] Spectral fit parameter nH value = 4.3994e+22
[Thu Feb 16 15:41:59 2012] Spectral fit parameter PhoIndex value = 1.0665
[Thu Feb 16 15:41:59 2012] Failed to get F(0.3-8.0) from xmm0552920101/analysis//spectral/fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 16 15:41:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 15:41:59 2012] Using Nh = 4.4e+22, photon index=1.07, rate=0.253, arf fullrun_mos1_xmm0552920101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 15:41:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 15:41:59 2012] Updating source flux to 9.7e-12