[Fri Jun  1 03:59:03 2012] Detection parameters:
  Position = (218.9, 289.0) = 10 54 37.15 -5 47 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.2 +/- 26.8
  Background counts = 120.7
  Rate = 0.01 +/- 0.0008

[Fri Jun  1 03:59:03 2012] Off-axis axis estimate = 5.81'
[Fri Jun  1 04:02:53 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 04:02:53 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Fri Jun  1 04:02:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.286
[Fri Jun  1 04:02:53 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.33"
[Fri Jun  1 04:36:59 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jun  1 04:36:59 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jun  1 04:36:59 2012] Fit fullrun_pn_xmm0552860101_pi300-10000_cl_pass0_src12 appears to have run properly
[Fri Jun  1 04:36:59 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jun  1 04:36:59 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jun  1 04:36:59 2012] Fit fullrun_pn_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jun  1 05:23:29 2012] Spatial fit model total counts = 784.140000, observed total counts = 716.000000
[Fri Jun  1 05:23:29 2012] Offset between fit and detection position for source 12 = 0.150025 pixels
[Fri Jun  1 05:23:29 2012] 781.169000 total counts/ 576.756000 bgd. counts: snr = 8.511624
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.150025 pixels
  Position = (218.9, 289.1) = 10 54 37.14 -5 47 48.4
  Extent = 5.1 (4.4-6.0)", rotation angle = 0
  Source counts = 204.4 +/- 27.9
  Background counts = 576.8
  Rate = 0.006 +/- 0.0008
[Fri Jun  1 05:23:29 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 05:23:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 05:23:29 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 05:23:29 2012] Source does appear to be extended
[Fri Jun  1 05:23:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 05:23:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 05:23:45 2012] Initial guess for spatial extent in simple fitting = 5.14"
[Fri Jun  1 05:23:45 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.416
[Fri Jun  1 05:23:45 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 5.14"
[Fri Jun  1 05:56:58 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun  1 05:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_src12.csv
[Fri Jun  1 05:56:58 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun  1 05:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_src12.csv
[Fri Jun  1 05:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:56:58 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun  1 05:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun  1 05:56:58 2012] fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun  1 05:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun  1 05:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 06:34:13 2012] Spatial fit model total counts = 830.357000, observed total counts = 716.000000
[Fri Jun  1 06:34:13 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  1 06:34:13 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 06:34:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 06:34:13 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 06:34:13 2012] Source does appear to be extended
[Fri Jun  1 06:34:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 06:34:28 2012] XMMSAS src. selection expression = ellipse(18997.341380, 25105.923600, 308.233209, 308.233209, 0.000000, X, Y)
[Fri Jun  1 06:34:28 2012] Writing source region out to fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12_src.reg
[Fri Jun  1 06:34:28 2012] Extracting stamp from image fullrun_pn_xmm0552860101_pi300-10000_cl_sm2.00.img.gz, (201, 271) - (237, 307)
[Fri Jun  1 06:34:28 2012] XMMSAS bgd. selection expression = annulus(18997.341380, 25105.923600, 513.722015, 1027.444030, X, Y)
[Fri Jun  1 06:34:28 2012] Writing fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12.gif
[Fri Jun  1 06:47:13 2012] Mean detx,y = (5488.33, 3838.50) 
[Fri Jun  1 06:47:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 06:47:28 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 06:47:29 2012] Setting source spectrum file to fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun  1 06:47:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jun  1 08:05:55 2012] Updating aperture counts using extracted products
[Fri Jun  1 08:05:55 2012] Error reading totcts from fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun  1 08:05:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 08:05:56 2012] Using photon index=1.80, rate=0.00551, arf fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12.arf
[Fri Jun  1 08:05:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 08:05:56 2012] Updating source flux to 2.1e-14
[Fri Jun  1 08:07:00 2012] Flag p found in src. 12 procflags, skipping spectral fitting
[Fri Jun  1 08:07:22 2012] Reading fit data from xmm0552860101/analysis//spectral/fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12_pl.csv
[Fri Jun  1 08:07:22 2012] Spectral fit parameter nH value = 7.43563e+21
[Fri Jun  1 08:07:22 2012] Spectral fit parameter PhoIndex value = 7.49375
[Fri Jun  1 08:07:22 2012] Failed to get F(0.3-8.0) from xmm0552860101/analysis//spectral/fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Fri Jun  1 08:07:22 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 08:07:22 2012] Using Nh = 7.4e+21, photon index=7.49, rate=0.00551, arf fullrun_pn_xmm0552860101_pi300-10000_pass1_cl_src12.arf
[Fri Jun  1 08:07:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 08:07:22 2012] Updating source flux to 1.2e-14