[Fri Jun  1 03:59:39 2012] Detection parameters:
  Position = (432.4, 241.4) = 10 53 34.89 -5 51 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.4 +/- 13.3
  Background counts = 41.6
  Rate = 0.001 +/- 0.0003

[Fri Jun  1 03:59:39 2012] Off-axis axis estimate = 10.56'
[Fri Jun  1 04:51:03 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 04:51:03 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Jun  1 04:51:03 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.203
[Fri Jun  1 04:51:03 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.71"
[Fri Jun  1 05:23:21 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun  1 05:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src21.csv
[Fri Jun  1 05:23:21 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun  1 05:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src21.csv
[Fri Jun  1 05:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:23:22 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun  1 05:23:22 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun  1 05:23:22 2012] Fit fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Jun  1 05:23:36 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.375753 pixels away
[Fri Jun  1 05:23:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 05:23:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 05:23:36 2012] Assessing source extent using major
[Fri Jun  1 05:23:36 2012] Source does appear to be extended
[Fri Jun  1 05:23:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 06:11:35 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 06:11:35 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Jun  1 06:11:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.203
[Fri Jun  1 06:11:35 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.71"
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun  1 06:34:07 2012] Fit fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun  1 06:34:07 2012] Fit fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Jun  1 06:34:20 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.702233 pixels away
[Fri Jun  1 06:34:20 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 06:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 06:34:20 2012] Assessing source extent using major
[Fri Jun  1 06:34:20 2012] Source does appear to be extended
[Fri Jun  1 06:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 07:35:09 2012] XMMSAS src. selection expression = ellipse(37573.721802, 20954.930984, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 07:35:09 2012] Writing source region out to fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun  1 07:35:09 2012] Extracting stamp from image fullrun_mos2_xmm0552860101_pi300-10000_cl_sm2.00.img.gz, (395, 204) - (470, 279)
[Fri Jun  1 07:35:09 2012] XMMSAS bgd. selection expression = annulus(37573.721802, 20954.930984, 1087.500000, 2175.000000, X, Y) && !ellipse(39769.189423, 22979.617828, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 07:35:09 2012] Writing fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src23.gif
[Fri Jun  1 07:41:28 2012] Mean detx,y = (9489.67, 7944.14) 
[Fri Jun  1 07:41:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 07:41:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 07:41:45 2012] Setting source spectrum file to fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun  1 07:41:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun  1 08:04:04 2012] Not generating rmf since there are only 67 counts
[Fri Jun  1 08:04:04 2012] rmf not generated due to insufficient counts
[Fri Jun  1 08:05:57 2012] Updating aperture counts using extracted products
[Fri Jun  1 08:05:57 2012] Error reading totcts from fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun  1 08:05:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 08:05:58 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src23.arf
[Fri Jun  1 08:05:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 08:05:58 2012] Updating source flux to 3e-14
[Fri Jun  1 08:06:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting