[Fri Jun  1 03:59:39 2012] Detection parameters:
  Position = (295.7, 274.9) = 10 54 14.76 -5 48 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.4 +/- 20.4
  Background counts = 79.0
  Rate = 0.003 +/- 0.0004

[Fri Jun  1 03:59:39 2012] Off-axis axis estimate = 1.71'
[Fri Jun  1 04:51:03 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 04:51:03 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun  1 04:51:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Jun  1 04:51:03 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.29"
[Fri Jun  1 05:23:21 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun  1 05:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src9.csv
[Fri Jun  1 05:23:21 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun  1 05:23:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src9.csv
[Fri Jun  1 05:23:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 05:23:22 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun  1 05:23:22 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun  1 05:23:22 2012] Fit fullrun_mos2_xmm0552860101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun  1 05:23:36 2012] Spatial fit model total counts = 456.395000, observed total counts = 435.000000
[Fri Jun  1 05:23:36 2012] Offset between fit and detection position for source 14 = 0.194625 pixels
[Fri Jun  1 05:23:36 2012] 458.276000 total counts/ 352.154000 bgd. counts: snr = 5.655085
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.194625 pixels
  Position = (295.8, 275.1) = 10 54 14.73 -5 48 49.4
  Extent = 5.4 (4.0-7.0)", rotation angle = 0
  Source counts = 106.1 +/- 21.4
  Background counts = 352.2
  Rate = 0.002 +/- 0.0005
[Fri Jun  1 05:23:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 05:23:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 05:23:36 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 05:23:36 2012] Source does appear to be extended
[Fri Jun  1 05:23:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 06:11:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 06:11:35 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Fri Jun  1 06:11:35 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.329
[Fri Jun  1 06:11:35 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.37"
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun  1 06:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun  1 06:34:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src9.csv
[Fri Jun  1 06:34:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun  1 06:34:07 2012] fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun  1 06:34:07 2012] Fit fullrun_mos2_xmm0552860101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun  1 06:34:20 2012] Spatial fit model total counts = 451.525000, observed total counts = 438.000000
[Fri Jun  1 06:34:20 2012] Offset between fit and detection position for source 14 = 0.018763 pixels
[Fri Jun  1 06:34:20 2012] 452.786000 total counts/ 343.656000 bgd. counts: snr = 5.886839
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.018763 pixels
  Position = (295.8, 275.1) = 10 54 14.74 -5 48 49.4
  Extent = 5.5 (4.1-7.2)", rotation angle = 0
  Source counts = 109.1 +/- 21.3
  Background counts = 343.7
  Rate = 0.002 +/- 0.0005
[Fri Jun  1 06:34:20 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 06:34:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 06:34:20 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 06:34:20 2012] Source does appear to be extended
[Fri Jun  1 06:34:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 07:35:08 2012] XMMSAS src. selection expression = ellipse(25683.424800, 23888.465400, 330.916810, 330.916810, 0.000000, X, Y)
[Fri Jun  1 07:35:08 2012] Writing source region out to fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src14_src.reg
[Fri Jun  1 07:35:08 2012] Extracting stamp from image fullrun_mos2_xmm0552860101_pi300-10000_cl_sm2.00.img.gz, (277, 256) - (315, 294)
[Fri Jun  1 07:35:08 2012] XMMSAS bgd. selection expression = annulus(25683.424800, 23888.465400, 551.528016, 1103.056032, X, Y)
[Fri Jun  1 07:35:08 2012] Writing fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src14.gif
[Fri Jun  1 07:37:27 2012] Mean detx,y = (86.86, 99.65) 
[Fri Jun  1 07:37:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 07:37:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 07:37:36 2012] Setting source spectrum file to fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun  1 07:37:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jun  1 08:05:57 2012] Updating aperture counts using extracted products
[Fri Jun  1 08:05:57 2012] Error reading totcts from fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun  1 08:05:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 08:05:58 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos2_xmm0552860101_pi300-10000_pass1_cl_src14.arf
[Fri Jun  1 08:05:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 08:05:58 2012] Updating source flux to 3.2e-14