[Sat May 26 17:50:54 2012] Detection parameters: Position = (256.0, 232.1) = 22 46 11.30 39 35 18.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 73.5 +/- 15.0 Background counts = 63.1 Rate = 0.002 +/- 0.0004 [Sat May 26 17:50:55 2012] Off-axis axis estimate = 5.71' [Sat May 26 17:54:57 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting [Sat May 26 17:54:57 2012] Initial guess for spatial extent in simple fitting = 9.28" [Sat May 26 17:54:57 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.297 [Sat May 26 17:54:57 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 9.28" [Sat May 26 20:04:00 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src68.ximg exists [Sat May 26 20:04:00 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src68_1.ximg exists [Sat May 26 20:04:00 2012] Fit fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src68 appears to have run properly [Sat May 26 20:04:01 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists [Sat May 26 20:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src68.csv [Sat May 26 20:04:01 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists [Sat May 26 20:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src68.csv [Sat May 26 20:04:01 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 26 23:12:36 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 10.900698 pixels away [Sat May 26 23:12:36 2012] Vigneting correction estimate = 1.000000 [Sat May 26 23:12:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 26 23:12:36 2012] Assessing source extent using major [Sat May 26 23:12:36 2012] Source does appear to be extended [Sat May 26 23:12:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 26 23:13:11 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting [Sat May 26 23:13:11 2012] Initial guess for spatial extent in simple fitting = 9.28" [Sat May 26 23:13:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.297 [Sat May 26 23:13:11 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.28" [Sun May 27 00:55:18 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src67.ximg exists [Sun May 27 00:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src67.csv [Sun May 27 00:55:18 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src67_1.ximg exists [Sun May 27 00:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src67.csv [Sun May 27 00:55:18 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src67_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 27 00:55:19 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src67.ximg exists [Sun May 27 00:55:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src67.csv [Sun May 27 00:55:19 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists [Sun May 27 00:55:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src67.csv [Sun May 27 00:55:19 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src67_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 27 03:17:02 2012] Spatial fit model total counts = 801.386000, observed total counts = 641.000000 [Sun May 27 03:17:02 2012] Poor agreement between spatial fit and data for source 69 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 27 03:17:02 2012] Vigneting correction estimate = 1.000000 [Sun May 27 03:17:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 27 03:17:02 2012] Assessing source extent using major [Sun May 27 03:17:02 2012] Source does appear to be extended [Sun May 27 03:17:02 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 27 03:17:34 2012] XMMSAS src. selection expression = ellipse(22222.203018, 20142.600876, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 27 03:17:34 2012] Writing source region out to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src69_src.reg [Sun May 27 03:17:34 2012] Extracting stamp from image fullrun_pn_xmm0552580201_pi300-10000_cl_sm2.00.img.gz, (218, 195) - (293, 270) [Sun May 27 03:17:34 2012] XMMSAS bgd. selection expression = annulus(22222.203018, 20142.600876, 1087.500000, 2175.000000, X, Y) && !ellipse(19802.058853, 17284.590607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21938.855637, 22339.413269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19276.106000, 20884.132000, 1622.384047, 1622.384047, 0.000000, X, Y) && !ellipse(20437.723312, 19929.220154, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 27 03:17:34 2012] Writing fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src69.gif [Sun May 27 03:54:29 2012] Mean detx,y = (-3193.31, 7985.42) [Sun May 27 03:54:32 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 27 03:54:51 2012] Binned source spectrum to 10 counts/bin [Sun May 27 03:54:51 2012] Setting source spectrum file to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src69_src_b10.pi.gz [Sun May 27 03:54:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src69_bgd.pi.gz [Sun May 27 04:55:18 2012] Not generating rmf since there are only 73 counts [Sun May 27 04:55:18 2012] rmf not generated due to insufficient counts [Sun May 27 06:44:05 2012] Updating aperture counts using extracted products [Sun May 27 06:44:05 2012] Error reading totcts from fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src69_src_b10.pi.gz [Sun May 27 06:44:06 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 27 06:44:06 2012] Using photon index=1.80, rate=0.00215, arf fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src69.arf [Sun May 27 06:44:06 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 27 06:44:06 2012] Updating source flux to 9.2e-15 [Sun May 27 06:46:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting