[Sat May 26 17:50:52 2012] Detection parameters:
  Position = (410.5, 269.9) = 22 45 13.13 39 38 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1064.4 +/- 40.6
  Background counts = 75.9
  Rate = 0.03 +/- 0.001

[Sat May 26 17:50:55 2012] Off-axis axis estimate = 8.38'
[Sat May 26 17:54:57 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sat May 26 17:54:57 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sat May 26 17:54:57 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.809
[Sat May 26 17:54:57 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.62"
[Sat May 26 20:03:59 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src5.ximg exists
[Sat May 26 20:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src5.csv
[Sat May 26 20:03:59 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May 26 20:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src5.csv
[Sat May 26 20:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 20:04:00 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May 26 20:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 26 20:04:00 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 26 20:04:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat May 26 20:04:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:12:36 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.564509 pixels away
[Sat May 26 23:12:36 2012] Vigneting correction estimate = 1.000000
[Sat May 26 23:12:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 23:12:36 2012] Assessing source extent using major
[Sat May 26 23:12:36 2012] Source does appear to be extended
[Sat May 26 23:12:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 23:13:11 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:13:11 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Sat May 26 23:13:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.809
[Sat May 26 23:13:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.62"
[Sun May 27 00:55:17 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src5.ximg exists
[Sun May 27 00:55:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src5.csv
[Sun May 27 00:55:17 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May 27 00:55:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src5.csv
[Sun May 27 00:55:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 00:55:18 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May 27 00:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May 27 00:55:18 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 27 00:55:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May 27 00:55:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:17:02 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.695490 pixels away
[Sun May 27 03:17:02 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:17:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:17:02 2012] Assessing source extent using major
[Sun May 27 03:17:02 2012] Source does appear to be extended
[Sun May 27 03:17:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:17:33 2012] Counts = 1064.360474, rescaling region sizes by 2.000000
[Sun May 27 03:17:33 2012] XMMSAS src. selection expression = ellipse(35665.934570, 23431.381683, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 27 03:17:33 2012] Writing source region out to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src5_src.reg
[Sun May 27 03:17:33 2012] Extracting stamp from image fullrun_pn_xmm0552580201_pi300-10000_cl_sm2.00.img.gz, (336, 195) - (486, 345)
[Sun May 27 03:17:33 2012] XMMSAS bgd. selection expression = annulus(35665.934570, 23431.381683, 4350.000000, 8700.000000, X, Y) && !ellipse(27474.487400, 27277.855400, 454.445613, 454.445613, 0.000000, X, Y) && !ellipse(37345.179535, 26113.383423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37756.648010, 18819.676773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32876.664200, 25724.259200, 381.600811, 381.600811, 0.000000, X, Y) && !ellipse(28148.463379, 27513.321960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40420.144196, 23545.141724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41089.466461, 32850.451233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41415.219971, 29605.206268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34861.192535, 20075.165787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38664.984236, 32024.552125, 483.754579, 256.008427, 67.564350, X, Y) && !ellipse(27357.788736, 29390.483400, 341.408810, 341.408810, 0.000000, X, Y) && !ellipse(39854.819427, 28830.654572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.074066, 28622.893219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28590.273529, 28218.163208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32257.179626, 28021.444122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26440.015747, 27781.663116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41421.180511, 27704.364594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26037.990000, 27421.371800, 1635.616047, 1635.616047, 0.000000, X, Y) && !ellipse(34159.417847, 26885.471252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29983.598389, 26905.553894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28739.531311, 26762.203552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33359.757538, 26423.891754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36714.894165, 26561.889557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29245.774000, 26425.116000, 1225.120035, 1225.120035, 0.000000, X, Y) && !ellipse(26729.875916, 26413.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32584.664300, 23242.541800, 421.055212, 421.055212, 0.000000, X, Y) && !ellipse(32262.689000, 22181.925800, 412.184012, 412.184012, 0.000000, X, Y) && !ellipse(35368.308441, 20305.883850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28242.326630, 20020.348724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32740.227692, 14767.413086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35423.721000, 17818.890600, 420.492812, 420.492812, 0.000000, X, Y) && !ellipse(35583.936646, 17370.759583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35243.299042, 15609.565811, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:17:33 2012] Writing fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src5.gif
[Sun May 27 03:22:18 2012] Mean detx,y = (9045.49, 1486.78) 
[Sun May 27 03:22:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:23:57 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:23:57 2012] Setting source spectrum file to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 27 03:23:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 27 04:03:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:03:20 2012] rmf not generated due to insufficient counts
[Sun May 27 06:44:04 2012] Updating aperture counts using extracted products
[Sun May 27 06:44:04 2012] Error reading totcts from fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 27 06:44:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 06:44:05 2012] Using photon index=1.80, rate=0.0296, arf fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src5.arf
[Sun May 27 06:44:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 06:44:05 2012] Updating source flux to 1.1e-13
[Sun May 27 06:46:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting