[Sat May 26 17:50:52 2012] Detection parameters:
  Position = (148.2, 321.2) = 22 46 51.96 39 41 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2360.0 +/- 59.7
  Background counts = 65.9
  Rate = 0.04 +/- 0.0009

[Sat May 26 17:50:55 2012] Off-axis axis estimate = 11.02'
[Sat May 26 17:54:57 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Sat May 26 17:54:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 17:54:57 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Sat May 26 17:54:57 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.855
[Sat May 26 17:54:57 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.94"
[Sat May 26 20:03:59 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 26 20:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src2.csv
[Sat May 26 20:03:59 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 26 20:03:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src2.csv
[Sat May 26 20:03:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 20:04:00 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 26 20:04:00 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 26 20:04:00 2012] Fit fullrun_pn_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 26 23:12:36 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.849606 pixels away
[Sat May 26 23:12:36 2012] Vigneting correction estimate = 1.000000
[Sat May 26 23:12:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 23:12:36 2012] Assessing source extent using major
[Sat May 26 23:12:36 2012] Source does appear to be extended
[Sat May 26 23:12:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 23:13:11 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Sat May 26 23:13:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 23:13:11 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Sat May 26 23:13:11 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.855
[Sat May 26 23:13:11 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.94"
[Sun May 27 00:55:17 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 27 00:55:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src2.csv
[Sun May 27 00:55:17 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 27 00:55:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src2.csv
[Sun May 27 00:55:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 00:55:18 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 27 00:55:18 2012] fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 27 00:55:18 2012] Fit fullrun_pn_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun May 27 03:17:02 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.269377 pixels away
[Sun May 27 03:17:02 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.475934 pixels away
[Sun May 27 03:17:02 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:17:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:17:02 2012] Assessing source extent using major
[Sun May 27 03:17:02 2012] Source does appear to be extended
[Sun May 27 03:17:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 03:17:32 2012] Counts = 2360.013184, rescaling region sizes by 2.000000
[Sun May 27 03:17:32 2012] XMMSAS src. selection expression = ellipse(12842.279221, 27896.949799, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 27 03:17:32 2012] Writing source region out to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src2_src.reg
[Sun May 27 03:17:32 2012] Extracting stamp from image fullrun_pn_xmm0552580201_pi300-10000_cl_sm2.00.img.gz, (73, 246) - (223, 396)
[Sun May 27 03:17:32 2012] XMMSAS bgd. selection expression = annulus(12842.279221, 27896.949799, 4350.000000, 8700.000000, X, Y) && !ellipse(11983.061295, 25798.311096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17735.974792, 18407.119736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.302048, 27103.342957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18414.617980, 19893.599600, 402.729612, 402.729612, 0.000000, X, Y) && !ellipse(12139.078781, 28480.193359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11928.240250, 21515.030655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13693.807640, 35344.017200, 385.141611, 385.141611, 0.000000, X, Y) && !ellipse(8842.280449, 22501.213409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.847458, 32616.670593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19475.147751, 29444.680542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21412.497400, 28002.536800, 344.072810, 344.072810, 0.000000, X, Y) && !ellipse(20537.110600, 27658.152800, 353.294410, 353.294410, 0.000000, X, Y) && !ellipse(21938.855637, 22339.413269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19276.106000, 20884.132000, 1622.384047, 1622.384047, 0.000000, X, Y) && !ellipse(22222.203018, 20142.600876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20437.723312, 19929.220154, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 03:17:32 2012] Writing fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src2.gif
[Sun May 27 03:18:56 2012] Mean detx,y = (-14267.19, 2698.64) 
[Sun May 27 03:19:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 03:20:39 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 03:20:39 2012] Setting source spectrum file to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 03:20:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 27 04:02:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 04:02:41 2012] rmf not generated due to insufficient counts
[Sun May 27 06:44:04 2012] Updating aperture counts using extracted products
[Sun May 27 06:44:04 2012] Error reading totcts from fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 27 06:44:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 06:44:05 2012] Using photon index=1.80, rate=0.0354, arf fullrun_pn_xmm0552580201_pi300-10000_pass1_cl_src2.arf
[Sun May 27 06:44:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 06:44:05 2012] Updating source flux to 2.3e-13
[Sun May 27 06:46:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting