[Sat May 26 17:52:19 2012] Detection parameters:
  Position = (199.6, 312.0) = 22 46 32.58 39 41 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.3 +/- 17.6
  Background counts = 23.8
  Rate = 0.002 +/- 0.0002

[Sat May 26 17:52:20 2012] Off-axis axis estimate = 7.23'
[Sat May 26 21:37:19 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sat May 26 21:37:19 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Sat May 26 21:37:19 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Sat May 26 21:37:19 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.05"
[Sat May 26 23:12:20 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_src15.ximg exists
[Sat May 26 23:12:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_src15.csv
[Sat May 26 23:12:20 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat May 26 23:12:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_src15.csv
[Sat May 26 23:12:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:12:21 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat May 26 23:12:21 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat May 26 23:12:21 2012] Fit fullrun_mos2_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat May 26 23:12:55 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.086882 pixels away
[Sat May 26 23:12:55 2012] Vigneting correction estimate = 1.000000
[Sat May 26 23:12:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 23:12:55 2012] Assessing source extent using major
[Sat May 26 23:12:55 2012] Source does appear to be extended
[Sat May 26 23:12:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 02:06:25 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Sun May 27 02:06:25 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Sun May 27 02:06:25 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.950
[Sun May 27 02:06:25 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.05"
[Sun May 27 03:16:49 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 27 03:16:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_src15.csv
[Sun May 27 03:16:49 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 27 03:16:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_src15.csv
[Sun May 27 03:16:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:16:50 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 27 03:16:50 2012] fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 27 03:16:50 2012] Fit fullrun_mos2_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May 27 03:17:17 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.835852 pixels away
[Sun May 27 03:17:17 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:17:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:17:17 2012] Assessing source extent using major
[Sun May 27 03:17:17 2012] Source does appear to be extended
[Sun May 27 03:17:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 05:48:46 2012] XMMSAS src. selection expression = ellipse(17315.392929, 27097.746155, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 05:48:46 2012] Writing source region out to fullrun_mos2_xmm0552580201_pi300-10000_pass1_cl_src11_src.reg
[Sun May 27 05:48:46 2012] Extracting stamp from image fullrun_mos2_xmm0552580201_pi300-10000_cl_sm2.00.img.gz, (162, 275) - (237, 350)
[Sun May 27 05:48:46 2012] XMMSAS bgd. selection expression = annulus(17315.392929, 27097.746155, 1087.500000, 2175.000000, X, Y) && !ellipse(15469.560806, 24063.313171, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 05:48:46 2012] Writing fullrun_mos2_xmm0552580201_pi300-10000_pass1_cl_src11.gif
[Sun May 27 05:55:38 2012] Mean detx,y = (9780.56, -2672.77) 
[Sun May 27 05:55:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:55:45 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:55:45 2012] Setting source spectrum file to fullrun_mos2_xmm0552580201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 27 05:55:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552580201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 27 06:25:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 27 06:25:48 2012] rmf not generated due to insufficient counts
[Sun May 27 06:44:07 2012] Updating aperture counts using extracted products
[Sun May 27 06:44:07 2012] Error reading totcts from fullrun_mos2_xmm0552580201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 27 06:44:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 06:44:08 2012] Using photon index=1.80, rate=0.00221, arf fullrun_mos2_xmm0552580201_pi300-10000_pass1_cl_src11.arf
[Sun May 27 06:44:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 06:44:08 2012] Updating source flux to 4.5e-14
[Sun May 27 06:45:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting