[Sat May 26 17:51:45 2012] Detection parameters:
  Position = (453.7, 429.1) = 22 44 56.72 39 49 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.2 +/- 10.9
  Background counts = 32.7
  Rate = 0.0006 +/- 0.0002

[Sat May 26 17:51:47 2012] Off-axis axis estimate = 14.71'
[Sat May 26 20:04:01 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sat May 26 20:04:01 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Sat May 26 20:04:01 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.910
[Sat May 26 20:04:01 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 13.78"
[Sat May 26 21:37:18 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_src52.ximg exists
[Sat May 26 21:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_src52.csv
[Sat May 26 21:37:18 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_src52_1.ximg exists
[Sat May 26 21:37:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_src52.csv
[Sat May 26 21:37:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 21:37:19 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sat May 26 21:37:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sat May 26 21:37:19 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sat May 26 21:37:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sat May 26 21:37:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552580201_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 23:12:45 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.128333 pixels away
[Sat May 26 23:12:45 2012] Warning, spatial fit 52 centroid is now closest to src. 11
[Sat May 26 23:12:45 2012] Vigneting correction estimate = 1.000000
[Sat May 26 23:12:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 23:12:45 2012] Assessing source extent using major
[Sat May 26 23:12:45 2012] Source does appear to be extended
[Sat May 26 23:12:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 00:55:19 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Sun May 27 00:55:19 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Sun May 27 00:55:19 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.910
[Sun May 27 00:55:19 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 13.78"
[Sun May 27 02:06:25 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_src49.ximg exists
[Sun May 27 02:06:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_src49.csv
[Sun May 27 02:06:25 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_src49_1.ximg exists
[Sun May 27 02:06:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_src49.csv
[Sun May 27 02:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 02:06:25 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sun May 27 02:06:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun May 27 02:06:25 2012] fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sun May 27 02:06:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun May 27 02:06:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552580201_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 03:17:08 2012] Warning, spatial fit 49 centroid is now closest to src. 13
[Sun May 27 03:17:08 2012] Vigneting correction estimate = 1.000000
[Sun May 27 03:17:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 03:17:08 2012] Assessing source extent using major
[Sun May 27 03:17:08 2012] Source does appear to be extended
[Sun May 27 03:17:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 04:58:30 2012] XMMSAS src. selection expression = ellipse(39419.691986, 37284.729828, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 04:58:30 2012] Writing source region out to fullrun_mos1_xmm0552580201_pi300-10000_pass1_cl_src12_src.reg
[Sun May 27 04:58:30 2012] Extracting stamp from image fullrun_mos1_xmm0552580201_pi300-10000_cl_sm2.00.img.gz, (416, 392) - (491, 467)
[Sun May 27 04:58:30 2012] XMMSAS bgd. selection expression = annulus(39419.691986, 37284.729828, 1087.500000, 2175.000000, X, Y) && !ellipse(40523.390320, 36985.526611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37453.979980, 37736.660950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38608.824799, 37542.193329, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 04:58:30 2012] Writing fullrun_mos1_xmm0552580201_pi300-10000_pass1_cl_src12.gif
[Sun May 27 05:11:15 2012] Mean detx,y = (12787.71, 8880.80) 
[Sun May 27 05:11:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 05:11:24 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 05:11:24 2012] Setting source spectrum file to fullrun_mos1_xmm0552580201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 27 05:11:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552580201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun May 27 05:48:34 2012] Not generating rmf since there are only 42 counts
[Sun May 27 05:48:34 2012] rmf not generated due to insufficient counts
[Sun May 27 06:44:06 2012] Updating aperture counts using extracted products
[Sun May 27 06:44:06 2012] Error reading totcts from fullrun_mos1_xmm0552580201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun May 27 06:44:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 06:44:07 2012] Using photon index=1.80, rate=0.000598, arf fullrun_mos1_xmm0552580201_pi300-10000_pass1_cl_src12.arf
[Sun May 27 06:44:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 06:44:07 2012] Updating source flux to 1.6e-14
[Sun May 27 06:44:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting