[Mon Jul 23 11:30:56 2012] Detection parameters:
  Position = (250.3, 363.1) = 4 8 39.45 -20 59 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 387.4 +/- 30.3
  Background counts = 187.8
  Rate = 0.006 +/- 0.0005

[Mon Jul 23 11:30:58 2012] Off-axis axis estimate = 5.85'
[Mon Jul 23 11:40:18 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 11:40:18 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Jul 23 11:40:18 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.068
[Mon Jul 23 11:40:18 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.35"
[Mon Jul 23 14:17:34 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src45.ximg exists
[Mon Jul 23 14:17:34 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Jul 23 14:17:34 2012] Fit fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src45 appears to have run properly
[Mon Jul 23 14:17:35 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Jul 23 14:17:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Mon Jul 23 14:17:35 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Jul 23 14:17:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Mon Jul 23 14:17:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:28:13 2012] Source 48 is offset by 1.144680 and 5.715076 pixels which is larger than
2 X fitted extent = 3.605743 x 3.605743, not incorporating fit results
[Mon Jul 23 16:28:14 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:14 2012] Assessing source extent using major
[Mon Jul 23 16:28:14 2012] Source does appear to be extended
[Mon Jul 23 16:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:28:45 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 16:28:45 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Jul 23 16:28:45 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.068
[Mon Jul 23 16:28:45 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 9.35"
[Mon Jul 23 19:02:48 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src45.ximg exists
[Mon Jul 23 19:02:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src45.csv
[Mon Jul 23 19:02:48 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src45_1.ximg exists
[Mon Jul 23 19:02:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src45.csv
[Mon Jul 23 19:02:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:02:49 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Mon Jul 23 19:02:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Mon Jul 23 19:02:49 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Jul 23 19:02:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Mon Jul 23 19:02:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:11:48 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 13.139935 pixels away
[Mon Jul 23 21:11:48 2012] Spatial fit model total counts = 1900.210000, observed total counts = 1706.000000
[Mon Jul 23 21:11:48 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 21:11:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:11:48 2012] Assessing source extent using major
[Mon Jul 23 21:11:48 2012] Source does appear to be extended
[Mon Jul 23 21:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:12:20 2012] XMMSAS src. selection expression = ellipse(21726.774551, 31543.685638, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 21:12:20 2012] Writing source region out to fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src48_src.reg
[Mon Jul 23 21:12:20 2012] Extracting stamp from image fullrun_pn_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (213, 326) - (288, 401)
[Mon Jul 23 21:12:20 2012] XMMSAS bgd. selection expression = annulus(21726.774551, 31543.685638, 1087.500000, 2175.000000, X, Y) && !ellipse(22480.886505, 32914.217072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21508.804611, 29638.449890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19628.105220, 33530.964600, 461.548013, 461.548013, 0.000000, X, Y) && !ellipse(19546.527600, 32522.196000, 615.812818, 317.910409, 0.000000, X, Y) && !ellipse(20969.476562, 29637.095825, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 21:12:20 2012] Writing fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src48.gif
[Mon Jul 23 22:25:12 2012] Mean detx,y = (-6759.08, -2642.28) 
[Mon Jul 23 22:25:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 22:25:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 22:25:47 2012] Setting source spectrum file to fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Jul 23 22:25:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue Jul 24 00:26:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 00:26:36 2012] rmf not generated due to insufficient counts
[Tue Jul 24 03:16:54 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:16:54 2012] Error reading totcts from fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue Jul 24 03:16:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:16:57 2012] Using photon index=1.80, rate=0.00613, arf fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src48.arf
[Tue Jul 24 03:16:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:16:57 2012] Updating source flux to 2.4e-14
[Tue Jul 24 03:20:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting