[Mon Jul 23 11:30:55 2012] Detection parameters:
  Position = (443.6, 269.0) = 4 7 39.37 -21 6 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1530.9 +/- 48.9
  Background counts = 183.3
  Rate = 0.01 +/- 0.0004

[Mon Jul 23 11:30:58 2012] Off-axis axis estimate = 10.74'
[Mon Jul 23 11:40:18 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 11:40:18 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Mon Jul 23 11:40:18 2012] source mask rpix=2.7, npix_max = 41, mask sum = 31, frac = 0.751
[Mon Jul 23 11:40:18 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.80"
[Mon Jul 23 14:17:33 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jul 23 14:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src11.csv
[Mon Jul 23 14:17:33 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jul 23 14:17:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src11.csv
[Mon Jul 23 14:17:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 14:17:35 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jul 23 14:17:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jul 23 14:17:35 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jul 23 14:17:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jul 23 14:17:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:28:13 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.111418 pixels away
[Mon Jul 23 16:28:14 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:14 2012] Assessing source extent using major
[Mon Jul 23 16:28:14 2012] Source does appear to be extended
[Mon Jul 23 16:28:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:28:45 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 16:28:45 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Mon Jul 23 16:28:45 2012] source mask rpix=2.7, npix_max = 41, mask sum = 31, frac = 0.751
[Mon Jul 23 16:28:45 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.80"
[Mon Jul 23 19:02:47 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jul 23 19:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src11.csv
[Mon Jul 23 19:02:47 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jul 23 19:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src11.csv
[Mon Jul 23 19:02:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:02:49 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jul 23 19:02:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jul 23 19:02:49 2012] fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jul 23 19:02:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jul 23 19:02:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:11:48 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.800184 pixels away
[Mon Jul 23 21:11:48 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 15.111418 pixels away
[Mon Jul 23 21:11:48 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:11:48 2012] Assessing source extent using major
[Mon Jul 23 21:11:48 2012] Source does appear to be extended
[Mon Jul 23 21:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:12:20 2012] Counts = 1530.903198, rescaling region sizes by 2.000000
[Mon Jul 23 21:12:20 2012] XMMSAS src. selection expression = ellipse(38546.428955, 23358.440063, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul 23 21:12:20 2012] Writing source region out to fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src14_src.reg
[Mon Jul 23 21:12:20 2012] Extracting stamp from image fullrun_pn_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (369, 194) - (519, 344)
[Mon Jul 23 21:12:20 2012] XMMSAS bgd. selection expression = annulus(38546.428955, 23358.440063, 4350.000000, 8700.000000, X, Y) && !ellipse(30932.845703, 27959.571320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37947.576477, 25175.165100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35459.182129, 23721.592316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33850.909954, 14405.208210, 593.431725, 341.218250, 335.118997, X, Y) && !ellipse(32380.988000, 31251.954000, 425.483212, 425.483212, 0.000000, X, Y) && !ellipse(35296.096954, 28147.061523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38551.831680, 26828.926200, 380.197611, 380.197611, 0.000000, X, Y) && !ellipse(36610.203705, 32584.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33580.082489, 32070.217773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37268.077484, 31517.822998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37303.747803, 31126.089355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33182.608673, 30711.039246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33807.187400, 30698.474000, 627.399218, 627.399218, 0.000000, X, Y) && !ellipse(30169.717000, 30249.443400, 431.099212, 431.099212, 0.000000, X, Y) && !ellipse(30883.986800, 29981.292600, 324.251209, 324.251209, 0.000000, X, Y) && !ellipse(37984.059235, 19596.020615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31770.741000, 18329.348000, 472.725614, 472.725614, 0.000000, X, Y) && !ellipse(33488.412292, 15795.155014, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 21:12:20 2012] Writing fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src14.gif
[Mon Jul 23 21:40:56 2012] Mean detx,y = (11780.46, 168.45) 
[Mon Jul 23 21:41:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 21:42:50 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 21:42:50 2012] Setting source spectrum file to fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jul 23 21:42:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jul 24 00:01:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 00:01:03 2012] rmf not generated due to insufficient counts
[Tue Jul 24 03:16:53 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:16:53 2012] Error reading totcts from fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul 24 03:16:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:16:56 2012] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0552510101_pi300-10000_pass1_cl_src14.arf
[Tue Jul 24 03:16:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:16:56 2012] Updating source flux to 5.6e-14
[Tue Jul 24 03:20:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting