[Mon Jul 23 11:32:02 2012] Detection parameters:
  Position = (437.3, 287.0) = 4 7 41.33 -21 5 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 425.3 +/- 29.8
  Background counts = 147.3
  Rate = 0.006 +/- 0.0004

[Mon Jul 23 11:32:02 2012] Off-axis axis estimate = 10.10'
[Mon Jul 23 15:12:30 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 15:12:30 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Mon Jul 23 15:12:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Mon Jul 23 15:12:30 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.48"
[Mon Jul 23 16:27:57 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul 23 16:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src7.csv
[Mon Jul 23 16:27:57 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul 23 16:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src7.csv
[Mon Jul 23 16:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:27:58 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul 23 16:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jul 23 16:27:58 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul 23 16:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon Jul 23 16:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:28:28 2012] Warning, spatial fit 7 centroid is now closest to src. 33
[Mon Jul 23 16:28:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:28 2012] Assessing source extent using major
[Mon Jul 23 16:28:28 2012] Source does appear to be extended
[Mon Jul 23 16:28:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 19:54:36 2012] Using EEF radius (= 11.48 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:54:36 2012] Initial guess for spatial extent in simple fitting = 11.48"
[Mon Jul 23 19:54:36 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.913
[Mon Jul 23 19:54:36 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.48"
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul 23 21:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src7.csv
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul 23 21:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src7.csv
[Mon Jul 23 21:11:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul 23 21:11:30 2012] Fit fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jul 23 21:12:01 2012] Spatial fit model total counts = 732.648000, observed total counts = 668.000000
[Mon Jul 23 21:12:01 2012] Offset between fit and detection position for source 38 = 0.203650 pixels
[Mon Jul 23 21:12:01 2012] 727.495000 total counts/ 498.766000 bgd. counts: snr = 10.241718
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.203650 pixels
  Position = (437.1, 287.1) = 4 7 41.39 -21 5 2.1
  Extent = 4.4 (3.9-5.2)", rotation angle = 0
  Source counts = 228.7 +/- 27.0
  Background counts = 498.8
  Rate = 0.002 +/- 0.0002
[Mon Jul 23 21:12:01 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:12:01 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 21:12:01 2012] Source does appear to be extended
[Mon Jul 23 21:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 02:00:24 2012] XMMSAS src. selection expression = ellipse(37982.347780, 24926.593000, 266.127608, 266.127608, 0.000000, X, Y)
[Tue Jul 24 02:00:24 2012] Writing source region out to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src38_src.reg
[Tue Jul 24 02:00:24 2012] Extracting stamp from image fullrun_mos2_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (422, 272) - (452, 302)
[Tue Jul 24 02:00:24 2012] XMMSAS bgd. selection expression = annulus(37982.347780, 24926.593000, 443.546013, 887.092026, X, Y)
[Tue Jul 24 02:00:24 2012] Writing fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src38.gif
[Tue Jul 24 02:06:09 2012] Mean detx,y = (-10604.57, 1118.62) 
[Tue Jul 24 02:06:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 02:06:17 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 02:06:18 2012] Setting source spectrum file to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jul 24 02:06:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Jul 24 03:17:00 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:17:00 2012] Error reading totcts from fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jul 24 03:17:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:17:02 2012] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src38.arf
[Tue Jul 24 03:17:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:17:02 2012] Updating source flux to 4.6e-14