[Mon Jul 23 11:32:01 2012] Detection parameters:
  Position = (355.9, 344.2) = 4 8 6.64 -21 0 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.5 +/- 21.6
  Background counts = 183.9
  Rate = 0.001 +/- 0.0002

[Mon Jul 23 11:32:02 2012] Off-axis axis estimate = 5.33'
[Mon Jul 23 15:12:30 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 15:12:30 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Mon Jul 23 15:12:30 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Mon Jul 23 15:12:30 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.09"
[Mon Jul 23 16:27:57 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src37.ximg exists
[Mon Jul 23 16:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src37.csv
[Mon Jul 23 16:27:57 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon Jul 23 16:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src37.csv
[Mon Jul 23 16:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:27:58 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon Jul 23 16:27:58 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Jul 23 16:27:58 2012] Fit fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Jul 23 16:28:28 2012] Source 25 is offset by 8.267298 and -3.634821 pixels which is larger than
2 X fitted extent = 1.333656 x 1.333656, not incorporating fit results
[Mon Jul 23 16:28:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:28 2012] Assessing source extent using major
[Mon Jul 23 16:28:28 2012] Source does appear to be extended
[Mon Jul 23 16:28:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 19:54:36 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:54:36 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Mon Jul 23 19:54:36 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Mon Jul 23 19:54:36 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 9.09"
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jul 23 21:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src37.csv
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jul 23 21:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src37.csv
[Mon Jul 23 21:11:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:11:31 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jul 23 21:11:31 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jul 23 21:11:31 2012] Fit fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Jul 23 21:12:01 2012] Source 25 is offset by 8.267504 and -3.649396 pixels which is larger than
2 X fitted extent = 1.374055 x 1.374055, not incorporating fit results
[Mon Jul 23 21:12:01 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:12:01 2012] Assessing source extent using major
[Mon Jul 23 21:12:01 2012] Source does appear to be extended
[Mon Jul 23 21:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 02:00:25 2012] XMMSAS src. selection expression = ellipse(30915.388885, 29899.298553, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 02:00:25 2012] Writing source region out to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src25_src.reg
[Tue Jul 24 02:00:25 2012] Extracting stamp from image fullrun_mos2_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (318, 307) - (393, 382)
[Tue Jul 24 02:00:25 2012] XMMSAS bgd. selection expression = annulus(30915.388885, 29899.298553, 1087.500000, 2175.000000, X, Y) && !ellipse(28726.281800, 29826.045400, 350.460010, 350.460010, 0.000000, X, Y) && !ellipse(28096.018585, 26931.161652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32434.502000, 31271.015000, 446.847540, 446.847540, 0.000000, X, Y)
[Tue Jul 24 02:00:25 2012] Writing fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src25.gif
[Tue Jul 24 02:17:19 2012] Mean detx,y = (-2363.05, 3666.92) 
[Tue Jul 24 02:17:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 02:17:30 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 02:17:30 2012] Setting source spectrum file to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jul 24 02:17:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jul 24 03:11:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 03:11:59 2012] rmf not generated due to insufficient counts
[Tue Jul 24 03:17:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:17:01 2012] Error reading totcts from fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jul 24 03:17:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:17:02 2012] Using photon index=1.80, rate=0.0012, arf fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src25.arf
[Tue Jul 24 03:17:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:17:02 2012] Updating source flux to 1.5e-14
[Tue Jul 24 03:18:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting