[Mon Jul 23 11:32:00 2012] Detection parameters:
  Position = (247.3, 155.9) = 4 8 40.42 -21 14 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.1 +/- 24.9
  Background counts = 109.0
  Rate = 0.002 +/- 0.0002

[Mon Jul 23 11:32:02 2012] Off-axis axis estimate = 10.98'
[Mon Jul 23 15:12:30 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 15:12:30 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Mon Jul 23 15:12:30 2012] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.786
[Mon Jul 23 15:12:30 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.92"
[Mon Jul 23 16:27:57 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jul 23 16:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src18.csv
[Mon Jul 23 16:27:57 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jul 23 16:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src18.csv
[Mon Jul 23 16:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:27:58 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jul 23 16:27:58 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jul 23 16:27:58 2012] Fit fullrun_mos2_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Mon Jul 23 16:28:28 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.489273 pixels away
[Mon Jul 23 16:28:28 2012] Spatial fit model total counts = 585.367000, observed total counts = 567.000000
[Mon Jul 23 16:28:28 2012] Offset between fit and detection position for source 10 = 0.564817 pixels
[Mon Jul 23 16:28:28 2012] Warning, changing simple spatial fit ID from 18 to 38
[Mon Jul 23 16:28:28 2012] 555.102000 total counts/ 110.757000 bgd. counts: snr = 42.221602
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.564817 pixels
  Position = (247.0, 155.4) = 4 8 40.52 -21 14 35.0
  Extent = 24.2 (24.1-48.3)", rotation angle = 0
  Source counts = 444.3 +/- 23.6
  Background counts = 110.8
  Rate = 0.004 +/- 0.0002
[Mon Jul 23 16:28:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:28 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 16:28:28 2012] Source does appear to be extended
[Mon Jul 23 16:28:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:28:28 2012] Source is confused with source 52
[Mon Jul 23 16:28:28 2012] Source is confused with source 41
[Mon Jul 23 19:54:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:54:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 19:54:36 2012] Initial guess for spatial extent in simple fitting = 24.16"
[Mon Jul 23 19:54:36 2012] source mask rpix=5.6, npix_max = 146, mask sum = 151, frac = 1.030
[Mon Jul 23 19:54:36 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 24.16"
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jul 23 21:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src18.csv
[Mon Jul 23 21:11:30 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jul 23 21:11:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src18.csv
[Mon Jul 23 21:11:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 21:11:31 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jul 23 21:11:31 2012] fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jul 23 21:11:31 2012] Fit fullrun_mos2_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Jul 23 21:12:01 2012] Warning, spatial fit 18 centroid is now closest to src. 51
[Mon Jul 23 21:12:01 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:12:01 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 21:12:01 2012] Source does appear to be extended
[Mon Jul 23 21:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 02:00:24 2012] XMMSAS src. selection expression = ellipse(21436.836000, 13475.493800, 1449.666042, 1449.666042, 0.000000, X, Y)
[Tue Jul 24 02:00:24 2012] Writing source region out to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src10_src.reg
[Tue Jul 24 02:00:24 2012] Extracting stamp from image fullrun_mos2_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (164, 72) - (330, 239)
[Tue Jul 24 02:00:24 2012] XMMSAS bgd. selection expression = annulus(21436.836000, 13475.493800, 2416.110070, 4832.220139, X, Y) && !ellipse(23626.832674, 12959.507295, 848.733671, 444.668800, 352.693699, X, Y) && !ellipse(26767.622467, 10029.586319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24470.711487, 18932.984131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23191.412170, 16575.422989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16475.109344, 14838.975418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20786.567750, 13418.496200, 303.955209, 303.955209, 0.000000, X, Y) && !ellipse(19834.788727, 13614.855576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22710.180145, 12854.992828, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 24 02:00:24 2012] Writing fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src10.gif
[Tue Jul 24 02:09:21 2012] Mean detx,y = (1634.37, -14846.53) 
[Tue Jul 24 02:09:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 02:10:16 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 02:10:16 2012] Setting source spectrum file to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jul 24 02:10:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Jul 24 03:17:01 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:17:01 2012] Error reading totcts from fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Jul 24 03:17:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:17:02 2012] Using photon index=1.80, rate=0.00408, arf fullrun_mos2_xmm0552510101_pi300-10000_pass1_cl_src10.arf
[Tue Jul 24 03:17:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:17:02 2012] Updating source flux to 9.2e-14
[Tue Jul 24 03:18:49 2012] Flag c found in src. 10 procflags, skipping spectral fitting