[Mon Jul 23 11:31:26 2012] Detection parameters:
  Position = (166.0, 265.7) = 4 9 5.68 -21 6 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.7 +/- 22.4
  Background counts = 152.5
  Rate = 0.001 +/- 0.0002

[Mon Jul 23 11:31:26 2012] Off-axis axis estimate = 9.89'
[Mon Jul 23 14:17:36 2012] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 14:17:36 2012] Initial guess for spatial extent in simple fitting = 11.37"
[Mon Jul 23 14:17:36 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Mon Jul 23 14:17:36 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.37"
[Mon Jul 23 15:12:29 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jul 23 15:12:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src26.csv
[Mon Jul 23 15:12:29 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jul 23 15:12:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src26.csv
[Mon Jul 23 15:12:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 15:12:30 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jul 23 15:12:30 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jul 23 15:12:30 2012] Fit fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Mon Jul 23 16:28:19 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.776020 pixels away
[Mon Jul 23 16:28:19 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:19 2012] Assessing source extent using major
[Mon Jul 23 16:28:19 2012] Source does appear to be extended
[Mon Jul 23 16:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 19:02:49 2012] Using EEF radius (= 11.37 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:02:49 2012] Initial guess for spatial extent in simple fitting = 11.37"
[Mon Jul 23 19:02:49 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.928
[Mon Jul 23 19:02:49 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 11.37"
[Mon Jul 23 19:54:35 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jul 23 19:54:35 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jul 23 19:54:35 2012] Fit fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Jul 23 19:54:36 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jul 23 19:54:36 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jul 23 19:54:36 2012] Fit fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Jul 23 21:11:54 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.786713 pixels away
[Mon Jul 23 21:11:54 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:11:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:11:54 2012] Assessing source extent using major
[Mon Jul 23 21:11:54 2012] Source does appear to be extended
[Mon Jul 23 21:11:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 01:13:38 2012] XMMSAS src. selection expression = ellipse(14390.599380, 23069.071075, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 01:13:38 2012] Writing source region out to fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src29_src.reg
[Tue Jul 24 01:13:38 2012] Extracting stamp from image fullrun_mos1_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (128, 228) - (203, 303)
[Tue Jul 24 01:13:38 2012] XMMSAS bgd. selection expression = annulus(14390.599380, 23069.071075, 1087.500000, 2175.000000, X, Y)
[Tue Jul 24 01:13:38 2012] Writing fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src29.gif
[Tue Jul 24 01:25:55 2012] Mean detx,y = (-7612.27, -11509.80) 
[Tue Jul 24 01:25:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 01:26:05 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 01:26:06 2012] Setting source spectrum file to fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul 24 01:26:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jul 24 01:52:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 01:52:02 2012] rmf not generated due to insufficient counts
[Tue Jul 24 03:16:59 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:16:59 2012] Error reading totcts from fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jul 24 03:17:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:17:00 2012] Using photon index=1.80, rate=0.00107, arf fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src29.arf
[Tue Jul 24 03:17:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:17:00 2012] Updating source flux to 2.7e-14
[Tue Jul 24 03:17:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting