[Mon Jul 23 11:31:26 2012] Detection parameters:
  Position = (327.0, 316.2) = 4 8 15.63 -21 2 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.7 +/- 25.1
  Background counts = 244.3
  Rate = 0.001 +/- 0.0002

[Mon Jul 23 11:31:26 2012] Off-axis axis estimate = 2.44'
[Mon Jul 23 14:17:36 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 14:17:36 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Jul 23 14:17:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Mon Jul 23 14:17:36 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.65"
[Mon Jul 23 15:12:29 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jul 23 15:12:30 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jul 23 15:12:30 2012] Fit fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_src29 appears to have run properly
[Mon Jul 23 15:12:30 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jul 23 15:12:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Jul 23 15:12:30 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jul 23 15:12:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Jul 23 15:12:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552510101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:28:19 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 12.894476 pixels away
[Mon Jul 23 16:28:19 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 16:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 16:28:19 2012] Assessing source extent using major
[Mon Jul 23 16:28:19 2012] Source does appear to be extended
[Mon Jul 23 16:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 19:02:49 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 19:02:49 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Mon Jul 23 19:02:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Mon Jul 23 19:02:49 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.65"
[Mon Jul 23 19:54:35 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src29.ximg exists
[Mon Jul 23 19:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src29.csv
[Mon Jul 23 19:54:35 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Jul 23 19:54:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src29.csv
[Mon Jul 23 19:54:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 19:54:36 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Jul 23 19:54:36 2012] fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jul 23 19:54:36 2012] Fit fullrun_mos1_xmm0552510101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Jul 23 21:11:54 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 36.952857 pixels away
[Mon Jul 23 21:11:54 2012] Source 25 is offset by 7.020217 and 2.610565 pixels which is larger than
2 X fitted extent = 5.039586 x 5.039586, not incorporating fit results
[Mon Jul 23 21:11:54 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 21:11:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 21:11:54 2012] Assessing source extent using major
[Mon Jul 23 21:11:54 2012] Source does appear to be extended
[Mon Jul 23 21:11:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 01:13:38 2012] XMMSAS src. selection expression = ellipse(28399.530914, 27456.613190, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 01:13:38 2012] Writing source region out to fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src25_src.reg
[Tue Jul 24 01:13:38 2012] Extracting stamp from image fullrun_mos1_xmm0552510101_pi300-10000_cl_sm2.00.img.gz, (289, 279) - (364, 354)
[Tue Jul 24 01:13:38 2012] XMMSAS bgd. selection expression = annulus(28399.530914, 27456.613190, 1087.500000, 2175.000000, X, Y) && !ellipse(27490.056200, 27200.697000, 731.488821, 705.788020, 108.678175, X, Y) && !ellipse(28727.886400, 29818.619600, 397.801611, 397.801611, 0.000000, X, Y) && !ellipse(27289.052160, 24916.340000, 385.925611, 385.925611, 0.000000, X, Y) && !ellipse(26588.672000, 28849.886000, 1204.592035, 1204.592035, 0.000000, X, Y)
[Tue Jul 24 01:13:38 2012] Writing fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src25.gif
[Tue Jul 24 01:27:32 2012] Mean detx,y = (732.69, 395.51) 
[Tue Jul 24 01:27:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 01:27:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 01:27:42 2012] Setting source spectrum file to fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jul 24 01:27:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jul 24 01:59:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 24 01:59:28 2012] rmf not generated due to insufficient counts
[Tue Jul 24 03:16:59 2012] Updating aperture counts using extracted products
[Tue Jul 24 03:16:59 2012] Error reading totcts from fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jul 24 03:17:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 03:17:00 2012] Using photon index=1.80, rate=0.000958, arf fullrun_mos1_xmm0552510101_pi300-10000_pass1_cl_src25.arf
[Tue Jul 24 03:17:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 03:17:00 2012] Updating source flux to 9.1e-15
[Tue Jul 24 03:17:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting