[Mon Jul  2 23:12:35 2012] Detection parameters:
  Position = (313.2, 407.4) = 5 33 15.04 -62 22 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3562.0 +/- 70.5
  Background counts = 71.6
  Rate = 0.2 +/- 0.004

[Mon Jul  2 23:12:35 2012] Off-axis axis estimate = 7.97'
[Mon Jul  2 23:14:34 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 23:14:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  2 23:14:34 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Jul  2 23:14:34 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.896
[Mon Jul  2 23:14:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.41"
[Tue Jul  3 00:06:30 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 00:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 00:06:30 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 00:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 00:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:06:30 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 00:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul  3 00:06:30 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 00:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul  3 00:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552410101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 01:04:30 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Tue Jul  3 01:04:30 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 01:04:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 01:04:30 2012] Assessing source extent using major
[Tue Jul  3 01:04:30 2012] Source does appear to be extended
[Tue Jul  3 01:04:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 01:04:30 2012] Source is confused with source 9
[Tue Jul  3 01:04:43 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 01:04:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 01:04:43 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Tue Jul  3 01:04:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.896
[Tue Jul  3 01:04:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.41"
[Tue Jul  3 03:40:52 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  3 03:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 03:40:52 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  3 03:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 03:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 03:40:53 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  3 03:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  3 03:40:53 2012] fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  3 03:40:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  3 03:40:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552410101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:38:38 2012] Spatial fit model total counts = 9275.190000, observed total counts = 7069.000000
[Tue Jul  3 04:38:38 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 04:38:38 2012] Spatial fit model total counts = 3248.370000, observed total counts = 2665.000000
[Tue Jul  3 04:38:38 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 04:38:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:38:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:38:38 2012] Assessing source extent using major
[Tue Jul  3 04:38:38 2012] Source does appear to be extended
[Tue Jul  3 04:38:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:38:51 2012] Counts = 3562.012451, rescaling region sizes by 2.000000
[Tue Jul  3 04:38:51 2012] XMMSAS src. selection expression = ellipse(27202.933105, 35391.218689, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jul  3 04:38:51 2012] Writing source region out to fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul  3 04:38:51 2012] Extracting stamp from image fullrun_pn_xmm0552410101_pi300-10000_cl_sm2.00.img.gz, (238, 332) - (388, 482)
[Tue Jul  3 04:38:51 2012] XMMSAS bgd. selection expression = annulus(27202.933105, 35391.218689, 4350.000000, 8700.000000, X, Y) && !ellipse(20858.443237, 38287.765381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27596.899628, 36342.027161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26310.480000, 36590.326000, 1721.488050, 1721.488050, 0.000000, X, Y) && !ellipse(28297.880463, 34705.257355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.980591, 34421.758636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36240.145700, 34646.503400, 495.520014, 495.520014, 0.000000, X, Y) && !ellipse(27271.190000, 34753.632000, 1570.264045, 1570.264045, 0.000000, X, Y) && !ellipse(27391.469391, 33905.735107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21399.843536, 31814.503937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.803345, 31368.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20140.330120, 31215.514200, 385.101611, 385.101611, 0.000000, X, Y) && !ellipse(34639.967240, 28920.600800, 451.250413, 451.250413, 0.000000, X, Y) && !ellipse(32741.743713, 27691.086792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.026120, 27730.796200, 371.020811, 371.020811, 0.000000, X, Y) && !ellipse(24086.953552, 26748.615112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29992.843201, 26407.621735, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 04:38:51 2012] Writing fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1.gif
[Tue Jul  3 04:39:07 2012] Mean detx,y = (8067.88, 4211.51) 
[Tue Jul  3 04:39:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:40:55 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:40:55 2012] Setting source spectrum file to fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 04:40:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul  3 04:56:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  3 04:56:50 2012] rmf not generated due to insufficient counts
[Tue Jul  3 06:06:20 2012] Updating aperture counts using extracted products
[Tue Jul  3 06:06:20 2012] Error reading totcts from fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 06:06:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 06:06:20 2012] Using photon index=1.80, rate=0.185, arf fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 06:06:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 06:06:20 2012] Updating source flux to 9.3e-13
[Tue Jul  3 06:07:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul  3 06:08:02 2012] xmm0552410101/analysis//spectral/fullrun_pn_xmm0552410101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete