[Thu Mar 15 21:25:22 2012] Detection parameters:
  Position = (198.6, 185.9) = 19 43 28.57 32 11 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.4 +/- 51.4
  Background counts = 47.7
  Rate = 0.005 +/- 0.001

[Thu Mar 15 21:25:22 2012] Off-axis axis estimate = 10.91'
[Thu Mar 15 22:38:16 2012] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:38:16 2012] Initial guess for spatial extent in simple fitting = 11.88"
[Thu Mar 15 22:38:16 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.814
[Thu Mar 15 22:38:16 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.88"
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_src11.ximg exists
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Mar 16 01:09:04 2012] Fit fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Mar 16 01:09:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Mar 16 01:09:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Mar 16 01:09:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 01:09:14 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.060094 pixels away
[Fri Mar 16 01:09:14 2012] Spatial fit model total counts = 651.417000, observed total counts = 631.000000
[Fri Mar 16 01:09:14 2012] Offset between fit and detection position for source 18 = 3.235850 pixels
[Fri Mar 16 01:09:14 2012] Warning, changing simple spatial fit ID from 11 to 16
[Fri Mar 16 01:09:14 2012] 695.571000 total counts/ 227.792000 bgd. counts: snr = 30.993562
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 3.235850 pixels
  Position = (201.7, 186.8) = 19 43 27.51 32 11 35.7
  Extent = 22.9 (22.4-23.1)", rotation angle = 0
  Source counts = 467.8 +/- 26.4
  Background counts = 227.8
  Rate = 0.01 +/- 0.0007
[Fri Mar 16 01:09:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 01:09:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 01:09:14 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 01:09:14 2012] Source does appear to be extended
[Fri Mar 16 01:09:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 01:09:14 2012] Source is confused with source 17
[Fri Mar 16 01:35:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 01:35:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 01:35:24 2012] Initial guess for spatial extent in simple fitting = 22.87"
[Fri Mar 16 01:35:24 2012] source mask rpix=5.3, npix_max = 132, mask sum = 106, frac = 0.799
[Fri Mar 16 01:35:24 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 22.87"
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src9.ximg exists
[Fri Mar 16 03:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src9.csv
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Mar 16 03:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src9.csv
[Fri Mar 16 03:08:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Mar 16 03:08:12 2012] Fit fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Mar 16 03:08:18 2012] Warning, spatial fit 9 centroid is now closest to src. 17
[Fri Mar 16 03:08:18 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 03:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 03:08:18 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 03:08:18 2012] Source does appear to be extended
[Fri Mar 16 03:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 08:37:57 2012] XMMSAS src. selection expression = ellipse(17500.916000, 16207.240000, 1372.224039, 1372.224039, 0.000000, X, Y)
[Fri Mar 16 08:37:57 2012] Writing source region out to fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src18_src.reg
[Fri Mar 16 08:37:57 2012] Extracting stamp from image fullrun_mos2_xmm0552270501_pi300-10000_cl_sm2.00.img.gz, (123, 108) - (281, 266)
[Fri Mar 16 08:37:57 2012] XMMSAS bgd. selection expression = annulus(17500.916000, 16207.240000, 2287.040066, 4574.080132, X, Y) && !ellipse(14696.303436, 17947.264679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17603.624237, 16473.492432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17948.870000, 16797.932000, 781.356822, 781.356822, 0.000000, X, Y) && !ellipse(15708.158000, 13746.318000, 2056.456059, 669.488019, 136.411000, X, Y) && !ellipse(15156.946000, 13100.570000, 1115.088032, 1115.088032, 0.000000, X, Y) && !ellipse(15661.098000, 13704.090000, 1356.344039, 1356.344039, 0.000000, X, Y) && !ellipse(16291.920420, 14530.564000, 2197.960063, 790.642423, 121.130500, X, Y)
[Fri Mar 16 08:37:57 2012] Writing fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src18.gif
[Fri Mar 16 08:57:09 2012] Mean detx,y = (11.59, 11106.78) 
[Fri Mar 16 08:57:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:57:56 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:57:57 2012] Setting source spectrum file to fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Mar 16 08:57:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Mar 16 10:38:30 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:38:30 2012] Error reading totcts from fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Mar 16 10:38:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:38:31 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src18.arf
[Fri Mar 16 10:38:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:38:31 2012] Updating source flux to 3.9e-13
[Fri Mar 16 10:48:37 2012] Flag c found in src. 18 procflags, skipping spectral fitting