[Thu Mar 15 21:25:21 2012] Detection parameters:
  Position = (276.8, 291.9) = 19 43 1.80 32 19 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1188162.5 +/- 1063.0
  Background counts = 83.1
  Rate = 3e+01 +/- 0.03

[Thu Mar 15 21:25:22 2012] Off-axis axis estimate = 1.64'
[Thu Mar 15 22:38:16 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 22:38:16 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Mar 15 22:38:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Thu Mar 15 22:38:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 01:09:04 2012] Fit fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 01:09:04 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 01:09:04 2012] Fit fullrun_mos2_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 16 01:09:14 2012] Spatial fit model total counts = 1092960.000000, observed total counts = 1142751.000000
[Fri Mar 16 01:09:14 2012] Offset between fit and detection position for source 1 = 0.192597 pixels
[Fri Mar 16 01:09:14 2012] 1073240.000000 total counts/ 25600.000000 bgd. counts: snr = 6547.750000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.192597 pixels
  Position = (276.8, 291.7) = 19 43 1.79 32 19 12.0
  Extent = 8.8 (8.8-8.8)", rotation angle = 0
  Source counts = 1047640.0 +/- 1036.0
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.03
[Fri Mar 16 01:09:14 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 01:09:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 01:09:14 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 01:09:14 2012] Source does appear to be extended
[Fri Mar 16 01:09:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 01:35:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 01:35:24 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Fri Mar 16 01:35:24 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Fri Mar 16 01:35:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.80"
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 03:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 03:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 03:08:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 03:08:12 2012] fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 03:08:12 2012] Fit fullrun_mos2_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 03:08:18 2012] Spatial fit model total counts = 1084760.000000, observed total counts = 1136497.000000
[Fri Mar 16 03:08:18 2012] Offset between fit and detection position for source 1 = 0.024585 pixels
[Fri Mar 16 03:08:18 2012] 1072080.000000 total counts/ 25600.000000 bgd. counts: snr = 6540.500000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024585 pixels
  Position = (276.8, 291.7) = 19 43 1.79 32 19 12.1
  Extent = 9.0 (9.0-9.0)", rotation angle = 0
  Source counts = 1046480.0 +/- 1035.4
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.03
[Fri Mar 16 03:08:18 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 03:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 03:08:18 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 03:08:18 2012] Source does appear to be extended
[Fri Mar 16 03:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 08:37:57 2012] Counts = 1046480.000000, rescaling region sizes by 3.000000
[Fri Mar 16 08:37:57 2012] XMMSAS src. selection expression = ellipse(24034.029400, 25329.730600, 1624.654847, 1624.654847, 0.000000, X, Y)
[Fri Mar 16 08:37:57 2012] Writing source region out to fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 08:37:57 2012] Extracting stamp from image fullrun_mos2_xmm0552270501_pi300-10000_cl_sm2.00.img.gz, (183, 198) - (370, 385)
[Fri Mar 16 08:37:57 2012] XMMSAS bgd. selection expression = annulus(24034.029400, 25329.730600, 8123.274234, 16246.548467, X, Y) && !ellipse(15208.567444, 32669.086182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23409.145813, 25975.961761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.145264, 31409.824371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14696.303436, 17947.264679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29184.097382, 18403.463760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17603.624237, 16473.492432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28352.842224, 31061.667725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17500.916000, 16207.240000, 1829.632053, 1829.632053, 0.000000, X, Y) && !ellipse(22669.528992, 9188.452461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16052.513641, 36429.343109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17948.870000, 16797.932000, 781.356822, 781.356822, 0.000000, X, Y) && !ellipse(15708.158000, 13746.318000, 2056.456059, 669.488019, 136.411000, X, Y) && !ellipse(15156.946000, 13100.570000, 1115.088032, 1115.088032, 0.000000, X, Y) && !ellipse(15661.098000, 13704.090000, 1356.344039, 1356.344039, 0.000000, X, Y) && !ellipse(16291.920420, 14530.564000, 2197.960063, 790.642423, 121.130500, X, Y)
[Fri Mar 16 08:37:57 2012] Writing fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 08:38:45 2012] Mean detx,y = (20.45, -62.43) 
[Fri Mar 16 08:38:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:44:11 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:44:12 2012] Setting source spectrum file to fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 08:44:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 10:38:30 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:38:30 2012] Error reading totcts from fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 10:38:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:38:31 2012] Using photon index=1.80, rate=29, arf fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 10:38:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:38:31 2012] Updating source flux to 3e-10
[Fri Mar 16 11:01:07 2012] Reading fit data from xmm0552270501/analysis//spectral/fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 11:01:07 2012] Spectral fit parameter nH value = 4.51347e+21
[Fri Mar 16 11:01:07 2012] Spectral fit parameter PhoIndex value = 9.99613
[Fri Mar 16 11:01:07 2012] Failed to get F(0.3-8.0) from xmm0552270501/analysis//spectral/fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 11:01:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 11:01:07 2012] Using Nh = 4.5e+21, photon index=10.00, rate=29, arf fullrun_mos2_xmm0552270501_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 11:01:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 11:01:07 2012] Updating source flux to 1.9e-10