[Thu Mar 15 21:24:57 2012] Detection parameters:
  Position = (219.2, 210.0) = 19 43 21.52 32 13 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 17.2
  Background counts = 72.3
  Rate = 0.004 +/- 0.0007

[Thu Mar 15 21:24:57 2012] Off-axis axis estimate = 8.61'
[Thu Mar 15 21:28:36 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 21:28:36 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Thu Mar 15 21:28:36 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.022
[Thu Mar 15 21:28:36 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.73"
[Thu Mar 15 22:38:15 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src14.ximg exists
[Thu Mar 15 22:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src14.csv
[Thu Mar 15 22:38:16 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Mar 15 22:38:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src14.csv
[Thu Mar 15 22:38:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:38:16 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Mar 15 22:38:16 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Mar 15 22:38:16 2012] Fit fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Mar 16 01:09:09 2012] Spatial fit model total counts = 717.540000, observed total counts = 717.000000
[Fri Mar 16 01:09:09 2012] Offset between fit and detection position for source 14 = 7.119781 pixels
[Fri Mar 16 01:09:09 2012] 664.999000 total counts/ 259.367000 bgd. counts: snr = 25.186908
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 7.119781 pixels
  Position = (222.9, 216.1) = 19 43 20.25 32 13 42.9
  Extent = 21.4 (21.3-21.5)", rotation angle = 0
  Source counts = 405.6 +/- 25.8
  Background counts = 259.4
  Rate = 0.01 +/- 0.0007
[Fri Mar 16 01:09:09 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 01:09:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 01:09:09 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 01:09:09 2012] Source does appear to be extended
[Fri Mar 16 01:09:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 01:09:09 2012] Source is confused with source 13
[Fri Mar 16 01:09:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 01:09:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 01:09:19 2012] Initial guess for spatial extent in simple fitting = 21.41"
[Fri Mar 16 01:09:19 2012] source mask rpix=4.9, npix_max = 117, mask sum = 100, frac = 0.850
[Fri Mar 16 01:09:19 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 21.41"
[Fri Mar 16 01:35:23 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src9.ximg exists
[Fri Mar 16 01:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src9.csv
[Fri Mar 16 01:35:23 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Mar 16 01:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src9.csv
[Fri Mar 16 01:35:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 01:35:24 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Mar 16 01:35:24 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Mar 16 01:35:24 2012] Fit fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Mar 16 03:08:15 2012] Warning, spatial fit 9 centroid is now closest to src. 13
[Fri Mar 16 03:08:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 03:08:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 03:08:15 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 03:08:15 2012] Source does appear to be extended
[Fri Mar 16 03:08:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 03:08:22 2012] XMMSAS src. selection expression = ellipse(19347.582000, 18749.736000, 1284.882037, 1284.882037, 0.000000, X, Y)
[Fri Mar 16 03:08:22 2012] Writing source region out to fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src14_src.reg
[Fri Mar 16 03:08:22 2012] Extracting stamp from image fullrun_mos1_xmm0552270501_pi300-10000_cl_sm2.00.img.gz, (149, 142) - (297, 290)
[Fri Mar 16 03:08:22 2012] XMMSAS bgd. selection expression = annulus(19347.582000, 18749.736000, 2141.470062, 4282.940123, X, Y) && !ellipse(24043.856000, 25342.537400, 2333.152867, 2333.152867, 0.000000, X, Y) && !ellipse(14712.930557, 17950.016617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19833.150000, 19752.890000, 3269.248094, 3269.248094, 0.000000, X, Y) && !ellipse(19012.154411, 18241.784781, 3474.208100, 434.276012, 303.747454, X, Y) && !ellipse(15736.777800, 13615.927680, 2490.120072, 426.096812, 126.003048, X, Y)
[Fri Mar 16 03:08:22 2012] Writing fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src14.gif
[Fri Mar 16 03:30:12 2012] Mean detx,y = (8165.92, -129.30) 
[Fri Mar 16 03:30:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 03:30:33 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 03:30:33 2012] Setting source spectrum file to fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Mar 16 03:30:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Mar 16 10:38:29 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:38:29 2012] Error reading totcts from fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Mar 16 10:38:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:38:30 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src14.arf
[Fri Mar 16 10:38:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:38:30 2012] Updating source flux to 1.4e-13
[Fri Mar 16 10:38:33 2012] Flag c found in src. 14 procflags, skipping spectral fitting