[Thu Mar 15 21:24:57 2012] Detection parameters:
  Position = (277.0, 291.9) = 19 43 1.74 32 19 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1271546.4 +/- 1139.1
  Background counts = 110.0
  Rate = 3e+01 +/- 0.03

[Thu Mar 15 21:24:57 2012] Off-axis axis estimate = 1.63'
[Thu Mar 15 21:28:36 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 21:28:36 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu Mar 15 21:28:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Mar 15 21:28:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Thu Mar 15 22:38:15 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 22:38:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 22:38:15 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 22:38:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 22:38:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 22:38:16 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 22:38:16 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 22:38:16 2012] Fit fullrun_mos1_xmm0552270501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 16 01:09:09 2012] Spatial fit model total counts = 1163040.000000, observed total counts = 1156386.000000
[Fri Mar 16 01:09:09 2012] Offset between fit and detection position for source 1 = 0.384648 pixels
[Fri Mar 16 01:09:09 2012] 1163000.000000 total counts/ 25600.000000 bgd. counts: snr = 7108.750000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.384648 pixels
  Position = (276.6, 292.1) = 19 43 1.86 32 19 13.9
  Extent = 10.6 (10.6-10.6)", rotation angle = 0
  Source counts = 1137400.0 +/- 1078.4
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.03
[Fri Mar 16 01:09:09 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 01:09:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 01:09:09 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 01:09:09 2012] Source does appear to be extended
[Fri Mar 16 01:09:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 01:09:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 16 01:09:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 01:09:19 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Fri Mar 16 01:09:19 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Fri Mar 16 01:09:19 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.60"
[Fri Mar 16 01:35:23 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 01:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 01:35:23 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 01:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 01:35:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 01:35:23 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 01:35:23 2012] fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 01:35:23 2012] Fit fullrun_mos1_xmm0552270501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar 16 03:08:15 2012] Spatial fit model total counts = 1137160.000000, observed total counts = 1215051.000000
[Fri Mar 16 03:08:15 2012] Offset between fit and detection position for source 1 = 0.410164 pixels
[Fri Mar 16 03:08:15 2012] 1136750.000000 total counts/ 40000.000000 bgd. counts: snr = 5483.750000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.410164 pixels
  Position = (276.9, 291.9) = 19 43 1.75 32 19 12.7
  Extent = 9.7 (9.7-9.7)", rotation angle = 0
  Source counts = 1096750.0 +/- 1066.2
  Background counts = 40000.0
  Rate = 3e+01 +/- 0.03
[Fri Mar 16 03:08:15 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 03:08:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 03:08:15 2012] Assessing source extent using major axis lower bound
[Fri Mar 16 03:08:15 2012] Source does appear to be extended
[Fri Mar 16 03:08:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 03:08:22 2012] Counts = 1096750.000000, rescaling region sizes by 3.000000
[Fri Mar 16 03:08:22 2012] XMMSAS src. selection expression = ellipse(24043.856000, 25342.537400, 1749.864650, 1749.864650, 0.000000, X, Y)
[Fri Mar 16 03:08:22 2012] Writing source region out to fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 03:08:22 2012] Extracting stamp from image fullrun_mos1_xmm0552270501_pi300-10000_cl_sm2.00.img.gz, (176, 191) - (377, 392)
[Fri Mar 16 03:08:22 2012] XMMSAS bgd. selection expression = annulus(24043.856000, 25342.537400, 8749.323252, 17498.646504, X, Y) && !ellipse(29153.273400, 18399.560200, 423.332012, 423.332012, 0.000000, X, Y) && !ellipse(14712.930557, 17950.016617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15234.566818, 32675.054688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24140.375397, 37453.462250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19833.150000, 19752.890000, 3269.248094, 3269.248094, 0.000000, X, Y) && !ellipse(19347.582000, 18749.736000, 1713.176049, 1713.176049, 0.000000, X, Y) && !ellipse(19012.154411, 18241.784781, 3474.208100, 434.276012, 303.747454, X, Y) && !ellipse(15736.777800, 13615.927680, 2490.120072, 426.096812, 126.003048, X, Y)
[Fri Mar 16 03:08:22 2012] Writing fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 03:09:09 2012] Mean detx,y = (125.62, -153.52) 
[Fri Mar 16 03:09:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 03:17:43 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 03:17:43 2012] Setting source spectrum file to fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 03:17:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 10:38:29 2012] Updating aperture counts using extracted products
[Fri Mar 16 10:38:29 2012] Error reading totcts from fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 10:38:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:38:30 2012] Using photon index=1.80, rate=30.3, arf fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 10:38:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:38:30 2012] Updating source flux to 2.8e-10
[Fri Mar 16 10:48:37 2012] Reading fit data from xmm0552270501/analysis//spectral/fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 16 10:48:37 2012] Spectral fit parameter nH value = 4.33182e+21
[Fri Mar 16 10:48:37 2012] Spectral fit parameter PhoIndex value = 9.99613
[Fri Mar 16 10:48:37 2012] Failed to get F(0.3-8.0) from xmm0552270501/analysis//spectral/fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 10:48:37 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 10:48:37 2012] Using Nh = 4.3e+21, photon index=10.00, rate=30.3, arf fullrun_mos1_xmm0552270501_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 10:48:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 10:48:37 2012] Updating source flux to 1.8e-10