[Wed Aug  1 10:23:54 2012] Detection parameters:
  Position = (317.1, 312.2) = 8 6 23.40 -41 22 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17748.4 +/- 180.9
  Background counts = 2795.6
  Rate = 1 +/- 0.01

[Wed Aug  1 10:23:55 2012] Off-axis axis estimate = 1.68'
[Wed Aug  1 10:32:02 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:32:02 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Aug  1 10:32:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Wed Aug  1 10:32:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Aug  1 13:16:33 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 13:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 13:16:33 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 13:16:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 13:16:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 13:16:34 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 13:16:34 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 13:16:34 2012] Fit fullrun_pn_xmm0552211201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 13:21:27 2012] Spatial fit model total counts = 33454.400000, observed total counts = 33441.000000
[Wed Aug  1 13:21:27 2012] Offset between fit and detection position for source 1 = 0.188336 pixels
[Wed Aug  1 13:21:27 2012] 33490.350000 total counts/ 24299.900000 bgd. counts: snr = 58.956886
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188336 pixels
  Position = (316.9, 312.3) = 8 6 23.47 -41 22 31.1
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 9190.5 +/- 183.0
  Background counts = 24299.9
  Rate = 0.6 +/- 0.01
[Wed Aug  1 13:21:27 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 13:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 13:21:27 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 13:21:27 2012] Source does appear to be extended
[Wed Aug  1 13:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 13:21:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 13:21:37 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Wed Aug  1 13:21:37 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.036
[Wed Aug  1 13:21:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.23"
[Wed Aug  1 14:30:30 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 14:30:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 14:30:30 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 14:30:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 14:30:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 14:30:30 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 14:30:30 2012] fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 14:30:30 2012] Fit fullrun_pn_xmm0552211201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 14:34:30 2012] Spatial fit model total counts = 33471.500000, observed total counts = 33441.000000
[Wed Aug  1 14:34:30 2012] Offset between fit and detection position for source 1 = 0.000820 pixels
[Wed Aug  1 14:34:30 2012] 33504.890000 total counts/ 24309.600000 bgd. counts: snr = 58.976164
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000820 pixels
  Position = (316.9, 312.3) = 8 6 23.47 -41 22 31.1
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 9195.3 +/- 183.0
  Background counts = 24309.6
  Rate = 0.6 +/- 0.01
[Wed Aug  1 14:34:30 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 14:34:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 14:34:30 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 14:34:30 2012] Source does appear to be extended
[Wed Aug  1 14:34:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 14:34:36 2012] Counts = 9195.290000, rescaling region sizes by 2.000000
[Wed Aug  1 14:34:36 2012] XMMSAS src. selection expression = ellipse(27523.870620, 27117.585600, 628.134018, 628.134018, 0.000000, X, Y)
[Wed Aug  1 14:34:36 2012] Writing source region out to fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 14:34:36 2012] Extracting stamp from image fullrun_pn_xmm0552211201_pi300-10000_cl_sm2.00.img.gz, (281, 276) - (353, 348)
[Wed Aug  1 14:34:36 2012] XMMSAS bgd. selection expression = annulus(27523.870620, 27117.585600, 2093.780060, 4187.560120, X, Y) && !ellipse(25808.267456, 27883.056030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26828.069519, 27859.511230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25672.369781, 27527.542297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28881.376400, 27253.920000, 1242.152036, 460.417613, 198.690000, X, Y) && !ellipse(28983.292206, 26838.907349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29957.318909, 26889.650269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29484.508636, 25786.889160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28440.508636, 26577.668396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30049.028931, 26329.378021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29197.494000, 26259.150000, 1224.064035, 1224.064035, 0.000000, X, Y) && !ellipse(25771.659912, 26065.213226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25206.072296, 26306.550079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30100.353302, 25800.594421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26223.795471, 28048.490906, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 14:34:36 2012] Writing fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 14:36:51 2012] Mean detx,y = (95.01, -167.20) 
[Wed Aug  1 14:36:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 14:37:18 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 14:37:18 2012] Setting source spectrum file to fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 14:37:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  1 15:58:36 2012] Updating aperture counts using extracted products
[Wed Aug  1 15:58:36 2012] Error reading totcts from fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 15:58:37 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 15:58:37 2012] Using photon index=1.80, rate=0.554, arf fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 15:58:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 15:58:37 2012] Updating source flux to 1.3e-12
[Wed Aug  1 16:00:26 2012] Reading fit data from xmm0552211201/analysis//spectral/fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  1 16:00:26 2012] Spectral fit parameter nH value = 7.23911e+20
[Wed Aug  1 16:00:26 2012] Spectral fit parameter PhoIndex value = 5.0862
[Wed Aug  1 16:00:26 2012] Failed to get F(0.3-8.0) from xmm0552211201/analysis//spectral/fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 16:00:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 16:00:26 2012] Using Nh = 7.2e+20, photon index=5.09, rate=0.554, arf fullrun_pn_xmm0552211201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  1 16:00:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 16:00:26 2012] Updating source flux to 6.5e-13