[Fri Jul 27 10:09:44 2012] Detection parameters:
  Position = (305.6, 275.8) = 8 6 23.34 -41 22 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1937.5 +/- 52.2
  Background counts = 8.6
  Rate = 0.2 +/- 0.006

[Fri Jul 27 10:09:44 2012] Off-axis axis estimate = 1.72'
[Fri Jul 27 10:21:46 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:21:46 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jul 27 10:21:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Jul 27 10:21:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 10:29:44 2012] Fit fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 10:29:44 2012] Fit fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 10:29:50 2012] Spatial fit model total counts = 1800.390000, observed total counts = 1761.000000
[Fri Jul 27 10:29:50 2012] Offset between fit and detection position for source 2 = 0.131983 pixels
[Fri Jul 27 10:29:50 2012] 1796.991000 total counts/ 452.531000 bgd. counts: snr = 63.200966
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.131983 pixels
  Position = (305.6, 275.7) = 8 6 23.35 -41 22 28.8
  Extent = 5.3 (5.0-5.5)", rotation angle = 0
  Source counts = 1344.5 +/- 42.4
  Background counts = 452.5
  Rate = 0.1 +/- 0.004
[Fri Jul 27 10:29:50 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 10:29:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 10:29:50 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 10:29:50 2012] Source does appear to be extended
[Fri Jul 27 10:29:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 10:36:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:36:50 2012] Initial guess for spatial extent in simple fitting = 5.25"
[Fri Jul 27 10:36:50 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.772
[Fri Jul 27 10:36:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 10:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 27 10:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:42:28 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Fri Jul 27 10:42:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 10:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 10:42:28 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 10:42:28 2012] Source does appear to be extended
[Fri Jul 27 10:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 11:03:58 2012] Counts = 1344.460000, rescaling region sizes by 2.000000
[Fri Jul 27 11:03:58 2012] XMMSAS src. selection expression = ellipse(26534.512800, 23933.716000, 630.306018, 630.306018, 0.000000, X, Y)
[Fri Jul 27 11:03:58 2012] Writing source region out to fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2_src.reg
[Fri Jul 27 11:03:58 2012] Extracting stamp from image fullrun_mos2_xmm0552211001_pi300-10000_cl_sm2.00.img.gz, (269, 239) - (342, 312)
[Fri Jul 27 11:03:58 2012] XMMSAS bgd. selection expression = annulus(26534.512800, 23933.716000, 2101.020060, 4202.040121, X, Y)
[Fri Jul 27 11:03:58 2012] Writing fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2.gif
[Fri Jul 27 11:04:02 2012] Mean detx,y = (114.37, 147.44) 
[Fri Jul 27 11:04:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 11:04:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 11:04:33 2012] Setting source spectrum file to fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 11:04:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 27 11:10:05 2012] Updating aperture counts using extracted products
[Fri Jul 27 11:10:05 2012] Error reading totcts from fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 27 11:10:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 11:10:05 2012] Using photon index=1.80, rate=0.141, arf fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 11:10:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 11:10:05 2012] Updating source flux to 1.5e-12
[Fri Jul 27 11:10:30 2012] Reading fit data from xmm0552211001/analysis//spectral/fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 27 11:10:30 2012] Spectral fit parameter nH value = 1.23215e+21
[Fri Jul 27 11:10:30 2012] Spectral fit parameter PhoIndex value = 6.19402
[Fri Jul 27 11:10:30 2012] Failed to get F(0.3-8.0) from xmm0552211001/analysis//spectral/fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 11:10:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 11:10:30 2012] Using Nh = 1.2e+21, photon index=6.19, rate=0.141, arf fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src2.arf
[Fri Jul 27 11:10:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 11:10:30 2012] Updating source flux to 1e-12