[Fri Jul 27 10:09:44 2012] Detection parameters:
  Position = (156.2, 219.0) = 8 7 21.13 -41 26 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.7 +/- 9.9
  Background counts = 3.5
  Rate = 0.007 +/- 0.001

[Fri Jul 27 10:09:44 2012] Off-axis axis estimate = 11.81'
[Fri Jul 27 10:21:46 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:21:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 10:21:46 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Fri Jul 27 10:21:46 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.809
[Fri Jul 27 10:21:46 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.34"
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 27 10:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 27 10:29:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src2.csv
[Fri Jul 27 10:29:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 27 10:29:44 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 27 10:29:44 2012] Fit fullrun_mos2_xmm0552211001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 27 10:29:50 2012] Spatial fit model total counts = 96.159600, observed total counts = 92.000000
[Fri Jul 27 10:29:50 2012] Offset between fit and detection position for source 1 = 0.291100 pixels
[Fri Jul 27 10:29:50 2012] 97.493000 total counts/ 54.109000 bgd. counts: snr = 5.897865
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.291100 pixels
  Position = (156.4, 219.1) = 8 7 21.03 -41 26 34.0
  Extent = 4.5 (3.6-6.5)", rotation angle = 0
  Source counts = 43.4 +/- 9.9
  Background counts = 54.1
  Rate = 0.005 +/- 0.001
[Fri Jul 27 10:29:50 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 10:29:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 10:29:50 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 10:29:50 2012] Source does appear to be extended
[Fri Jul 27 10:29:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 10:36:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:36:50 2012] Initial guess for spatial extent in simple fitting = 4.46"
[Fri Jul 27 10:36:50 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.967
[Fri Jul 27 10:36:50 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.46"
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src2.csv
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src2.csv
[Fri Jul 27 10:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 27 10:42:22 2012] fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 27 10:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 27 10:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552211001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 10:42:28 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Fri Jul 27 10:42:28 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 10:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 10:42:28 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 10:42:28 2012] Source does appear to be extended
[Fri Jul 27 10:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 11:03:58 2012] XMMSAS src. selection expression = ellipse(13561.799000, 19012.617600, 267.600008, 267.600008, 0.000000, X, Y)
[Fri Jul 27 11:03:58 2012] Writing source region out to fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 11:03:58 2012] Extracting stamp from image fullrun_mos2_xmm0552211001_pi300-10000_cl_sm2.00.img.gz, (141, 204) - (172, 234)
[Fri Jul 27 11:03:58 2012] XMMSAS bgd. selection expression = annulus(13561.799000, 19012.617600, 446.000013, 892.000026, X, Y)
[Fri Jul 27 11:03:58 2012] Writing fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 11:04:37 2012] Mean detx,y = (-12143.29, -6359.79) 
[Fri Jul 27 11:04:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 11:04:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 11:05:00 2012] Setting source spectrum file to fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 11:05:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 11:09:52 2012] Not generating rmf since there are only 43 counts
[Fri Jul 27 11:09:52 2012] rmf not generated due to insufficient counts
[Fri Jul 27 11:10:05 2012] Updating aperture counts using extracted products
[Fri Jul 27 11:10:05 2012] Error reading totcts from fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 11:10:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 11:10:05 2012] Using photon index=1.80, rate=0.00456, arf fullrun_mos2_xmm0552211001_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 11:10:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 11:10:05 2012] Updating source flux to 1.4e-13
[Fri Jul 27 11:10:17 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting