[Tue Jul 24 14:02:14 2012] Detection parameters:
  Position = (146.6, 402.5) = 4 19 23.12 38 7 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.3 +/- 44.3
  Background counts = 218.0
  Rate = 0.002 +/- 0.0004

[Tue Jul 24 14:02:15 2012] Off-axis axis estimate = 13.34'
[Tue Jul 24 19:02:00 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:02:00 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Tue Jul 24 19:02:00 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.892
[Tue Jul 24 19:02:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.10"
[Tue Jul 24 20:30:58 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jul 24 20:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src11.csv
[Tue Jul 24 20:30:58 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jul 24 20:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src11.csv
[Tue Jul 24 20:30:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue Jul 24 20:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:31:10 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.968461 pixels away
[Tue Jul 24 20:31:10 2012] Spatial fit model total counts = 159.860000, observed total counts = 299.000000
[Tue Jul 24 20:31:10 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 24 20:31:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 20:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 20:31:10 2012] Assessing source extent using major
[Tue Jul 24 20:31:10 2012] Source does appear to be extended
[Tue Jul 24 20:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 23:32:30 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 23:32:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 23:32:30 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Tue Jul 24 23:32:30 2012] source mask rpix=3.0, npix_max = 49, mask sum = 44, frac = 0.892
[Tue Jul 24 23:32:30 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.10"
[Tue Jul 24 23:59:23 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jul 24 23:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_src9.csv
[Tue Jul 24 23:59:23 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jul 24 23:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_src9.csv
[Tue Jul 24 23:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 23:59:24 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jul 24 23:59:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jul 24 23:59:24 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jul 24 23:59:24 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Jul 24 23:59:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 23:59:31 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.306981 pixels away
[Tue Jul 24 23:59:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 23:59:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 23:59:31 2012] Assessing source extent using major
[Tue Jul 24 23:59:31 2012] Source does appear to be extended
[Tue Jul 24 23:59:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 18:29:38 2012] XMMSAS src. selection expression = ellipse(12707.736938, 34968.907074, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 18:29:38 2012] Writing source region out to fullrun_mos2_xmm0552180101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 27 18:29:38 2012] Extracting stamp from image fullrun_mos2_xmm0552180101_pi300-10000_cl_sm2.00.img.gz, (109, 365) - (184, 440)
[Fri Jul 27 18:29:38 2012] XMMSAS bgd. selection expression = annulus(12707.736938, 34968.907074, 1087.500000, 2175.000000, X, Y)
[Fri Jul 27 18:29:38 2012] Writing fullrun_mos2_xmm0552180101_pi300-10000_pass1_cl_src4.gif
[Fri Jul 27 18:38:02 2012] Mean detx,y = (15330.67, 5640.80) 
[Fri Jul 27 18:38:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 18:38:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 18:38:20 2012] Setting source spectrum file to fullrun_mos2_xmm0552180101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 18:38:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0552180101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 27 18:49:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 27 18:49:49 2012] rmf not generated due to insufficient counts
[Fri Jul 27 18:56:37 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:56:37 2012] Error reading totcts from fullrun_mos2_xmm0552180101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 18:56:38 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:56:38 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0552180101_pi300-10000_pass1_cl_src4.arf
[Fri Jul 27 18:56:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:56:38 2012] Updating source flux to 7.1e-14
[Fri Jul 27 18:56:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting