[Tue Jul 24 14:02:14 2012] Detection parameters:
  Position = (131.1, 263.9) = 4 19 28.69 37 57 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.2 +/- 25.3
  Background counts = 235.5
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 14:02:15 2012] Off-axis axis estimate = 12.38'
[Tue Jul 24 19:02:00 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:02:00 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Tue Jul 24 19:02:00 2012] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.886
[Tue Jul 24 19:02:00 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.62"
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src26.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src26.csv
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src26.csv
[Tue Jul 24 20:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Jul 24 20:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:31:10 2012] Source 24 is offset by -4.636463 and 2.720158 pixels which is larger than
2 X fitted extent = 1.471931 x 1.471931, not incorporating fit results
[Tue Jul 24 20:31:10 2012] Source 24 is offset by -4.395567 and -2.986854 pixels which is larger than
2 X fitted extent = 1.482423 x 1.482423, not incorporating fit results
[Tue Jul 24 20:31:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 20:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 20:31:10 2012] Assessing source extent using major
[Tue Jul 24 20:31:10 2012] Source does appear to be extended
[Tue Jul 24 20:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 20:31:10 2012] Deleting source due to low Poisson probability 0.9