[Tue Jul 24 14:02:14 2012] Detection parameters:
  Position = (121.6, 306.7) = 4 19 32.26 38 0 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.7 +/- 25.3
  Background counts = 196.9
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 14:02:15 2012] Off-axis axis estimate = 12.84'
[Tue Jul 24 19:02:00 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:02:00 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Tue Jul 24 19:02:00 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.880
[Tue Jul 24 19:02:00 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.85"
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src28.csv
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src28.csv
[Tue Jul 24 20:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue Jul 24 20:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:31:10 2012] Source 20 is offset by 6.197425 and 2.055726 pixels which is larger than
2 X fitted extent = 1.453002 x 1.453002, not incorporating fit results
[Tue Jul 24 20:31:10 2012] Warning, spatial fit 28 centroid is now closest to src. 1
[Tue Jul 24 20:31:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 20:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 20:31:10 2012] Assessing source extent using major
[Tue Jul 24 20:31:10 2012] Source does appear to be extended
[Tue Jul 24 20:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 20:31:10 2012] Deleting source due to low Poisson probability 0.9