[Tue Jul 24 14:02:14 2012] Detection parameters:
  Position = (126.2, 355.7) = 4 19 30.59 38 4 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.8 +/- 24.6
  Background counts = 188.3
  Rate = 0.001 +/- 0.0002

[Tue Jul 24 14:02:15 2012] Off-axis axis estimate = 13.16'
[Tue Jul 24 19:02:00 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:02:00 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Tue Jul 24 19:02:00 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.862
[Tue Jul 24 19:02:00 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.01"
[Tue Jul 24 20:30:58 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jul 24 20:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src19.csv
[Tue Jul 24 20:30:58 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jul 24 20:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src19.csv
[Tue Jul 24 20:30:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jul 24 20:30:59 2012] fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jul 24 20:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Tue Jul 24 20:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 20:31:10 2012] Source 15 is offset by -9.663862 and 1.771487 pixels which is larger than
2 X fitted extent = 1.487692 x 1.487692, not incorporating fit results
[Tue Jul 24 20:31:10 2012] Warning, spatial fit 19 centroid is now closest to src. 13
[Tue Jul 24 20:31:10 2012] Source 15 is offset by -7.042551 and 3.241418 pixels which is larger than
2 X fitted extent = 1.482423 x 1.482423, not incorporating fit results
[Tue Jul 24 20:31:10 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 20:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 20:31:10 2012] Assessing source extent using major
[Tue Jul 24 20:31:10 2012] Source does appear to be extended
[Tue Jul 24 20:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 20:31:10 2012] Deleting source due to low Poisson probability 1.0