[Tue Jul 24 14:01:52 2012] Detection parameters:
  Position = (315.8, 312.7) = 4 18 20.77 38 0 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22607.0 +/- 1523.7
  Background counts = 465.3
  Rate = 0.2 +/- 0.01

[Tue Jul 24 14:01:53 2012] Off-axis axis estimate = 1.63'
[Tue Jul 24 18:27:41 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 18:27:41 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jul 24 18:27:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.640
[Tue Jul 24 18:27:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.24"
[Tue Jul 24 19:02:00 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 24 19:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_src2.csv
[Tue Jul 24 19:02:00 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 24 19:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_src2.csv
[Tue Jul 24 19:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:02:00 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 24 19:02:00 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 24 19:02:00 2012] Fit fullrun_mos1_xmm0552180101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jul 24 20:31:05 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Tue Jul 24 20:31:05 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 20:31:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 20:31:05 2012] Assessing source extent using major
[Tue Jul 24 20:31:05 2012] Source does appear to be extended
[Tue Jul 24 20:31:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 20:31:05 2012] Source is confused with source 1
[Tue Jul 24 21:28:34 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 21:28:34 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jul 24 21:28:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.640
[Tue Jul 24 21:28:34 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.24"
[Tue Jul 24 23:32:29 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jul 24 23:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_src2.csv
[Tue Jul 24 23:32:29 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jul 24 23:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_src2.csv
[Tue Jul 24 23:32:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 23:32:29 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jul 24 23:32:29 2012] fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jul 24 23:32:29 2012] Fit fullrun_mos1_xmm0552180101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jul 24 23:59:29 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Tue Jul 24 23:59:29 2012] Spatial fit model total counts = 8014.520000, observed total counts = 15571.000000
[Tue Jul 24 23:59:29 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 24 23:59:29 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 23:59:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 23:59:29 2012] Assessing source extent using major
[Tue Jul 24 23:59:29 2012] Source does appear to be extended
[Tue Jul 24 23:59:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 13:30:34 2012] Counts = 22607.035156, rescaling region sizes by 3.000000
[Fri Jul 27 13:30:34 2012] XMMSAS src. selection expression = ellipse(27425.286499, 27158.533051, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Jul 27 13:30:34 2012] Writing source region out to fullrun_mos1_xmm0552180101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 27 13:30:34 2012] Extracting stamp from image fullrun_mos1_xmm0552180101_pi300-10000_cl_sm2.00.img.gz, (203, 200) - (428, 425)
[Fri Jul 27 13:30:34 2012] XMMSAS bgd. selection expression = annulus(27425.286499, 27158.533051, 9787.500000, 19575.000000, X, Y) && !ellipse(27314.510200, 27535.138000, 1456.401642, 1456.401642, 0.000000, X, Y) && !ellipse(27941.633942, 27695.783539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28197.865509, 26675.819519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10994.301170, 25527.901672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34572.009399, 15875.226715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17274.277145, 39724.661926, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 13:30:34 2012] Writing fullrun_mos1_xmm0552180101_pi300-10000_pass1_cl_src3.gif
[Fri Jul 27 13:36:07 2012] Mean detx,y = (343.24, -153.29) 
[Fri Jul 27 13:36:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 13:49:48 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 13:49:49 2012] Setting source spectrum file to fullrun_mos1_xmm0552180101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 13:49:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0552180101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 27 14:22:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 27 14:22:57 2012] rmf not generated due to insufficient counts
[Fri Jul 27 18:56:36 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:56:36 2012] Error reading totcts from fullrun_mos1_xmm0552180101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 18:56:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:56:36 2012] Using photon index=1.80, rate=0.22, arf fullrun_mos1_xmm0552180101_pi300-10000_pass1_cl_src3.arf
[Fri Jul 27 18:56:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:56:36 2012] Updating source flux to 2.1e-12
[Fri Jul 27 18:56:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting